intercede 发表于 2025-3-25 05:11:11
Brian O’Sullivanto question the suitability of this method to screen developmental alloys, should their initiation life be governed by subsurface flaws. However, if applicable, the rapid generation of fatigue data using this method would facilitate faster design iterations, identifying more quickly, material and ma温顺 发表于 2025-3-25 11:34:08
sting signature profiles for the bilinear model are reproduced with higher resolution, and new features are observed. Different boundary conditions are evaluated with the new method and compared to published results. Although similar, there are still discrepancies that remain and will need to be invFLORA 发表于 2025-3-25 15:01:03
Brian O’Sullivan a few grains, have been observed. Cyclic hardening, vacancy formation and oxidation formation may be considered as possible explanations for early fatigue mechanisms. In addition, the new experimental setup can be used to define parameters needed for crack initiation models. Finally, these crack in喷油井 发表于 2025-3-25 17:43:03
http://reply.papertrans.cn/83/8247/824687/824687_24.png懦夫 发表于 2025-3-25 20:17:00
http://reply.papertrans.cn/83/8247/824687/824687_25.pnglegislate 发表于 2025-3-26 03:01:23
http://reply.papertrans.cn/83/8247/824687/824687_26.pngsultry 发表于 2025-3-26 05:09:14
signer of a dynamically loaded structure must “design against fatigue”. This includes not only the overall concept of the structure with related safety and economic aspects, but also questions on detail design, joints, production and material surface quality. At the same time, the designer must try磨碎 发表于 2025-3-26 10:02:54
Brian O’Sullivanms. The designer of a dynamically loaded structure must “design against fatigue”. This includes not only the overall concept of the structure with related safety and economic aspects, but also questions on detail design, joints, production and material surface quality. At the same time, the designer must try 978-0-306-48396-7Deject 发表于 2025-3-26 13:18:01
http://reply.papertrans.cn/83/8247/824687/824687_29.png商谈 发表于 2025-3-26 18:51:58
Brian O’Sullivanms. The designer of a dynamically loaded structure must “design against fatigue”. This includes not only the overall concept of the structure with related safety and economic aspects, but also questions on detail design, joints, production and material surface quality. At the same time, the designer must try 978-0-306-48396-7