HILAR
发表于 2025-3-25 05:07:46
Analytical Determination of Rheological Parameters of MR Fluids, of the MR fluid can be used to find the shear stress of the MR fluid when activated above high magnetic fields of the range of 2 T. It can be observed that the three approaches are matching quite well along with each other and are having a percentage error range from 2 to 7%.
租约
发表于 2025-3-25 09:45:38
http://reply.papertrans.cn/83/8235/823439/823439_22.png
extrovert
发表于 2025-3-25 14:32:44
Numerical Simulation of Bi-material Interfacial Adiabatic Crack Using EFGM and XFEM,is studied. This work involves the study which leads to the understanding of the effect of temperature on the stress fields of the cracks present in this complex configuration. Results for similar case are also plotted using XFEM. The results from both the methods are in coherence with each other.
一起平行
发表于 2025-3-25 18:38:16
Parametric Optimization of Hole Quality in Laser Drilling Kevlar/Basalt Hybrid FRP Composite,ularity. Thereafter, Taguchi Method has been applied to identify the optimum settings of laser drilling parameters to improve the hole quality. Results of this study indicate that the lamp current significantly affects on hole circularity.
laceration
发表于 2025-3-25 20:23:04
http://reply.papertrans.cn/83/8235/823439/823439_25.png
adduction
发表于 2025-3-26 02:44:24
http://reply.papertrans.cn/83/8235/823439/823439_26.png
自恋
发表于 2025-3-26 06:27:40
http://reply.papertrans.cn/83/8235/823439/823439_27.png
愤世嫉俗者
发表于 2025-3-26 09:11:52
http://reply.papertrans.cn/83/8235/823439/823439_28.png
和平主义
发表于 2025-3-26 14:27:30
http://reply.papertrans.cn/83/8235/823439/823439_29.png
Palliation
发表于 2025-3-26 17:06:45
Vibration Analysis for Failure Detection of Bearing and Gear Assembly,setup was built to capture the vibrational signal from three cases: healthy setup, faulty gear setup, and faulty bearing setup. The vibrational signal analysis was performed to compute the kurtosis value, peak value, RMS value, average value, standard deviation, and other statistical parameters used to estimate the system’s fault.