反叛者
发表于 2025-3-30 09:17:21
http://reply.papertrans.cn/83/8233/823281/823281_51.png
Iniquitous
发表于 2025-3-30 13:37:04
Modal Study on Isotropic Spherical Cap and Functionally Graded Spherical Panel Using COMSOL,al parameters are continuously graded along thickness direction according to power law gradation (P-FGM). The natural frequencies and corresponding mode shapes are obtained using FE software COMSOL Multiphysics. The variation of power law indices with natural frequencies under different end support is also reported in detail.
tendinitis
发表于 2025-3-30 18:19:03
http://reply.papertrans.cn/83/8233/823281/823281_53.png
BIDE
发表于 2025-3-30 20:44:15
Recent Applications, Developments and Challenges in Waterjet Technology,ning, assisted processes, micro machining and submerged waterjet machining. Finally, the review is completed by discussing the challenges in existing waterjet technology for further improvement of the process. The problems like grit embedment, backflow of AWJ, etc., are very well elaborated in this work.
可耕种
发表于 2025-3-31 03:00:08
Optimization of Heat Transfer Rate, Efficiency and Effectiveness for Thermal Performances of Steppemum heat transfer rate, efficiency and effectiveness. Step length ratio was found to be significant parameter. Increased value of step length ratio leads to lower the efficiency of fin and heat transfer.
陶瓷
发表于 2025-3-31 07:56:25
http://reply.papertrans.cn/83/8233/823281/823281_56.png
Enteropathic
发表于 2025-3-31 12:46:58
Development of Improving Model for the Surface Finish of Ball Bearing (Deep Groove) by Optimizing Cfactors in grinding and four variable factors in honing process were obtained through brainstorming. To improve surface finish of inner and outer track of deep groove ball bearing, hereby, the various experiments were to be conducted independently to know the effect of various process parameters on surface finish of deep groove ball bearing.
生存环境
发表于 2025-3-31 17:22:02
http://reply.papertrans.cn/83/8233/823281/823281_58.png
Airtight
发表于 2025-3-31 18:29:13
http://reply.papertrans.cn/83/8233/823281/823281_59.png
组成
发表于 2025-3-31 23:24:48
Friction Welding Process of AA7075 Aluminium Alloy to Mild Steel, been found most significant welding parameter that affects the impact strength of weldments followed by rotational speed and welding time. The R. and adjusted R. values for the impact strength prediction model have been found as 0.991 and 0.980, respectively, which are very close to each other.