uncertain
发表于 2025-3-28 16:18:57
Moving Load Identification on the Bridge by Accelerometer Transducer,m location. To implement the method an analytical pre-stress bridge model has been developed in the software. The vibration signatures are going to be extracted at a different location on the bridge which will provide us with the acceleration and displacement. The vehicle loads are going to be ident
露天历史剧
发表于 2025-3-28 20:53:57
Prediction of Carbonation on Precast Concrete Exposed to Severe Environmental Conditions,The carbonation induced corrosion occurred in marine concrete when carbon dioxide intrusion takes place into concrete cover and reaches the reinforcement causing corrosion in presence of moisture and oxygen. There are 3% CO. present in the atmosphere and some of the industrial belts, its concentrati
亵渎
发表于 2025-3-29 02:22:55
http://reply.papertrans.cn/83/8233/823230/823230_43.png
ALB
发表于 2025-3-29 04:17:37
Compressive Strength Prediction of Aluminosilicate Precursors Based Geopolymers Through Artificial 100% aluminosilicate-based waste materials have the potential to pave the path for sustainable development and construction practices. But many factors affect the compressive strength of geopolymers that needs to be evaluated before its utilization in any field practices. Hence the purpose of this a
JAUNT
发表于 2025-3-29 10:26:15
Load-Settlement Behaviour of Stone Column with Varied Spacing, soil was characterised in the laboratory and graded as intermediate compressible soil was chosen for stabilising with stone columns, as the settlement characteristic cs made the soil weak for construction. A laboratory study was conducted in understanding the behaviour of stone column with varied s
anus928
发表于 2025-3-29 14:45:28
http://reply.papertrans.cn/83/8233/823230/823230_46.png
flamboyant
发表于 2025-3-29 17:00:46
Nonlinear Vibration of Functionally Graded CNT-Reinforced Composite Plate Under Nonuniform In-Planene loadings is analyzed for the determination of plate’s nonlinear vibration behavior (frequency-amplitude curve). Firstly, to guesstimate the effective mechanical properties of the FG-CNTRC plate, the extended rule-of-mixture technique is implemented when CNTs are aligned and distributed throughout
VOC
发表于 2025-3-29 20:30:03
http://reply.papertrans.cn/83/8233/823230/823230_48.png
BINGE
发表于 2025-3-30 03:27:19
http://reply.papertrans.cn/83/8233/823230/823230_49.png
格子架
发表于 2025-3-30 04:59:45
http://reply.papertrans.cn/83/8233/823230/823230_50.png