Ordeal
发表于 2025-3-30 11:52:35
Comparative Study of Different Wind Turbine Blade Profile for Optimization on the Basis of Maximum , gliding ratios, lift coefficient, and drag coefficient. The optimization process goes further by investigating the performance of the final design, and it is clear from investigation that blade profile for (NACA 634221) is best suited in terms of highest gliding ratio and lift force compared to other blade profiles studied.
鞭子
发表于 2025-3-30 14:03:48
Design and Analysis of Crankshaft of Three Cylinder Engine,odel is developed using SolidWorks 2018 software. The study concludes that grey cast iron ENGJL100 is a suitable material for the crankshaft, exhibiting superior strength and durability when placed in the designated location within the design.
liaison
发表于 2025-3-30 17:21:10
,Molecular Dynamics Study on Tensile Strength of Ni-10Cu Alloy with Pre-existing Σ3 Grain Boundary,ed value. The dislocation extraction algorithm study revealed that the presence of a high amount of dislocation at high strain rates and low temperatures leads to increase in the ductility of alloy system.
主动脉
发表于 2025-3-30 21:48:14
Conference proceedings 2024gn, mechanics, static, and dynamic systems. The book also discusses various methods of software-aided design and analysis. Given the contents, the book is a valuable reference for beginners, researchers, and professionals working in various domains of mechanical engineering..
myalgia
发表于 2025-3-31 02:19:13
2195-4356 sign and analysis. Given the contents, the book is a valuable reference for beginners, researchers, and professionals working in various domains of mechanical engineering..978-981-97-3873-1978-981-97-3874-8Series ISSN 2195-4356 Series E-ISSN 2195-4364
脱毛
发表于 2025-3-31 08:49:48
Modelling and Study of Dynamics and Control of a Two-Link Serial Manipulator, equations and is therefore critical to the mechanical design of serial manipulators for practical industrial applications. This work paves way to better understanding in implementation of dynamic and control algorithms on different manipulators mainly serial manipulators.
NOCT
发表于 2025-3-31 12:09:23
Design of an Articulated Robotic Arm for Cooling and Touchup Area in Electronics Manufacturing Compime in touchup area to reduce the cycle time of the line and to increase the units per hour (UPH) of that line eventually increasing the productivity of the company. The robotic arm design is done using solid works. The paper is focused mainly on mechanical design of the structure.
持续
发表于 2025-3-31 15:02:37
Sparkling Rural Community for Sustainable Growth: A Doable Prospect,opment of a village that is based on the utilisation of renewable energy sources, including all forms of waste, while maintaining the environment to meet these demands for both the current generation and those that will come in the future. Specifically, the article will focus on the utilisation of waste as a source of energy.
crutch
发表于 2025-3-31 17:40:53
Theoretical and Computational Investigation on Aerospike Nozzle Equipped with Exhaust Plumes for Suization loop which involves changes in contour shape, spike height, or spike angle to achieve better flow expansion and reduce pressure losses. The paper also discusses the potential future research directions, such as investigating unsteady flow phenomena or exploring advanced turbulence models for more accurate predictions.
发源
发表于 2025-3-31 23:00:28
Study of Weld Bead Geometry and Optimization of Cold Metal Transfer (CMT) Process Parameters for Faoperties: dilution, microhardness, and penetration depth. Taguchi optimization technique was utilized to determine the optimal parameters, and the adequacy of the model was assessed through ANOVA analysis. The results indicated that the current had the most significant influence on the multiple responses, followed by the welding speed.