杀菌剂
发表于 2025-3-28 15:26:23
http://reply.papertrans.cn/83/8231/823085/823085_41.png
勤劳
发表于 2025-3-28 22:33:58
Bending Stiffness of Multilayer Plates with Alternating Soft and Hard Layers,s substantially greater than the plate thickness. We discuss the approximate methods for determining the shear compliance required for replacing a multilayer plate with an equivalent single-layer Timoshenko–Reissner plate. A comparison is made with the exact solution of the three-dimensional problem
无畏
发表于 2025-3-29 00:34:04
On the Bending of Multilayered Plates Considering Surface Viscoelasticity,icity we introduce the surface/interfacial stresses linearly dependent on the history of surface strains. In order to underline the surface viscoelasticity contribution to the bending response we restrict ourselves to the elastic behaviour in the bulk. Using the correspondence principle of the theor
声音刺耳
发表于 2025-3-29 06:44:23
Buckling of a Ring-Stiffened Cylindrical Shell Under the External Pressure,z method is used to obtain the problem’s analytical solution for the case of the simply supported edges of the shell. The parameters of the optimal distribution of the structure mass between the shell and the stiffening ribs, which is required to maximize the critical pressure, have been found. The
Myosin
发表于 2025-3-29 09:22:22
http://reply.papertrans.cn/83/8231/823085/823085_45.png
别炫耀
发表于 2025-3-29 15:10:06
On a New Theory of the Cosserat Continuum with Applications in Electrodynamics,e continuum and quantities characterizing electrodynamic processes. Taking into account the suggested analogies, we interpret equations describing the continuum as equations of electrodynamics. We identify parameters of our model by comparing the obtained equations with Maxwell’s equations. As a res
刻苦读书
发表于 2025-3-29 19:37:12
http://reply.papertrans.cn/83/8231/823085/823085_47.png
巡回
发表于 2025-3-29 23:11:43
http://reply.papertrans.cn/83/8231/823085/823085_48.png
解开
发表于 2025-3-30 00:33:58
http://reply.papertrans.cn/83/8231/823085/823085_49.png
山间窄路
发表于 2025-3-30 06:06:18
Dimension Reduction in the Plate with Tunnel Cuts,We demonstrate that the original 3D problem may be reduced to several 2D problems. The main attention is paid to the solution near the top and the bottom surfaces of the plate. Our numerical analysis indicates the existence of a new type of boundary layer at the upper and lower surfaces of the plate