跳脱衣舞的人
发表于 2025-3-30 10:56:33
Effect of Semi-cylindrical Protrusions on Thermal Behaviour of SPHE,E). First, SPHE with the plain surface is considered. The temperature data obtained for the plain SPHE from the present simulation is compared with the standard benchmark result. In order to improve heat transfer characteristics of SPHE, semi-cylindrical-shaped protrusions are provided at a regular
Lethargic
发表于 2025-3-30 16:00:43
Thermal Analysis for Solar Water Heater by Implementing Fins,ture especially for developing countries. Hence, the implementation of renewable resources and increasing their dependency is a major concern. In this paper, simulation was done for one of the heat transfer augmentation techniques in the solar water heater that by implementing rectangular fins also
crescendo
发表于 2025-3-30 19:00:34
http://reply.papertrans.cn/83/8231/823027/823027_53.png
Extricate
发表于 2025-3-30 22:52:22
Optimization of 3D Plate Fin Heat Sinks Through Analytical Modelling, continuous effort to increase the power density within minimum space, the design of highly efficient heat sinks has become mandatory for the proper functioning of devices. In this paper, a quick method to optimize the heat sinks with a fixed number of heat sources has been discussed. A new Analytic
压倒
发表于 2025-3-31 02:06:28
http://reply.papertrans.cn/83/8231/823027/823027_55.png
圆锥
发表于 2025-3-31 05:56:46
http://reply.papertrans.cn/83/8231/823027/823027_56.png
偏见
发表于 2025-3-31 11:06:15
http://reply.papertrans.cn/83/8231/823027/823027_57.png
仲裁者
发表于 2025-3-31 13:31:41
A Comprehensive Review on Nano-additives for the Enrichment of Diesel and Biodiesel Blends for Engiions, prompted extensive investigations on alternative fuels. Better fuel combustion and reduction in ecologically harmful emissions are the main concern for modern alternative fuel research. The exploitation of alternative fuels, biodiesels, is a promising option to meet the current energy requirem
defray
发表于 2025-3-31 19:38:48
Convective-Radiative Heat Transfer in a Rotating Cubic Cavity with a Local Heat Source,Vertical left and right walls are cooled, while other walls of the cavity are thermally insulated. The cavity has heat source on the bottom wall and it rotates at a constant angular velocity in counterclockwise direction relative to the .-axis. Mathematical model has been formulated using the dimens
小画像
发表于 2025-3-31 23:38:39
Performance Analysis of IC Engine Using Parabolic Fin,om the surface by several folds. IC engine is used to generate the mechanical power from chemical energy contain in a fuel which released to combustion of fuel inside the engine. If excessive heat is not removed, engine components may fail due to excessive temperature. Only approximately 30% of ener