CODA 发表于 2025-3-23 11:41:23
Pallabi Kakati,Devendra Dandotiya,Anand K. Joshi,Rajiv Ranjan Singh,C. S. Rameshits unfolding trends and future outlook.Reflects on whether The book provides an analysis of the dynamics of the global launch service market associated with small satellites, by placing a particular focus on its unfolding trends and future outlook..From an economic perspective, the emergence of numArchipelago 发表于 2025-3-23 17:25:24
http://reply.papertrans.cn/83/8231/823026/823026_12.pngambivalence 发表于 2025-3-23 19:50:17
http://reply.papertrans.cn/83/8231/823026/823026_13.pngGanglion 发表于 2025-3-23 22:30:07
CFD Analysis on Various Designs of Heat Sink,s of heatsinks with the addition of ribs and cavities resulted in a drop of 6% in the base temperature and 33% in the thermal resistance than a flat plate heat sink and hence, the study came to the conclusion that heat sinks with protrusions or cavities showed a much better thermal efficiency when compared to heat sinks with flat plates as fins.细菌等 发表于 2025-3-24 06:15:20
Flow and Heat Transfer Study Past a Solid and Slotted Circular Cylinder: Effect of Blockage Ratio,se in the blockage ratio in the scenarios considered. Overall, this study provides insights into how cylinder geometry and fluid properties affect heat transfer and flow characteristics in the laminar flow.纠缠,缠绕 发表于 2025-3-24 10:03:01
,Influence of Cross Section and Profile of a Cold Plate Mini-Channels in the Mitigation of Thermal Rluent platform. The results of numerical work at 5C rate indicate that wavy channels would reduce the peak temperature with a small penalty on higher power consumption due to higher pressure drop. The straight channel with higher number of channels performed quite well with lower peak temperature difference without much pressure drop.忘川河 发表于 2025-3-24 12:00:39
http://reply.papertrans.cn/83/8231/823026/823026_17.png松软无力 发表于 2025-3-24 17:16:27
A Parametric Investigation of Fin Geometries for Heat Transfer Enhancement in Internally Finned Tubnvestigated with reference to a plain pipe flow to identify optimum design parameters. The results indicate that on decreasing the pitch and increasing the fin height, thermal conductance increases but the pressure loss also rises. The better internal fin design of the two is also indicated toward the end.高调 发表于 2025-3-24 19:30:03
http://reply.papertrans.cn/83/8231/823026/823026_19.png弯曲的人 发表于 2025-3-25 02:22:28
Conference proceedings 2024bustion and IC engines, fluid machinery, heat and mass transfer, refrigeration and air-conditioning, renewable sources of energy, thermal systems simulation, heat exchangers, flow measurements, etc. The book is useful for researchers and professionals working in thermal engineering and allied fields..