裙带关系 发表于 2025-3-25 06:03:55
Synthesis of Aligned ZnO Nanorods with Different Parameters and Their Effects on Humidity Sensingonstrated that, ZnO nanorods grown from Zn(Ac). with shorter growing time and post annealing shows the best overall sensing characteristics. The nanorods without post annealing show much higher sensitivity and faster response, but very fast degradation and unstable response to RH changes.Rotator-Cuff 发表于 2025-3-25 09:44:33
Studies on Gas Sensing Performance of Pure and Nano- Ag Doped ZnO Thick Film Resistorsm from CO to H.S gas. A systematic study of sensing performance of the sensor indicates the key role-played by the nano silver species on the surface.The sensitivity, selectivity, response and recovery time of the sensor were measured and presented.友好关系 发表于 2025-3-25 14:23:53
http://reply.papertrans.cn/83/8230/822987/822987_23.pngVICT 发表于 2025-3-25 16:10:06
http://reply.papertrans.cn/83/8230/822987/822987_24.png朋党派系 发表于 2025-3-25 21:44:32
http://reply.papertrans.cn/83/8230/822987/822987_25.pngLURE 发表于 2025-3-26 00:19:12
Evaluation of Surface Flaw by Magnetic Flux Leakage Testing Using Amorphous MI Sensor and Neural Neteakage Testing (MFLT) using an amorphous MI sensor and a Neural Network (NN). The specimen is a magnetic material subjected to the magnetic field, and the Magnetic Flux Leakage (MFL) occurs near the flaw. We measure the biaxial MFL, i.e., the tangential and the normal components of MFL by an amorpho束以马具 发表于 2025-3-26 05:52:13
http://reply.papertrans.cn/83/8230/822987/822987_27.pngPARA 发表于 2025-3-26 10:58:02
VHDL-AMS Modelling of Ultrasound Measurement System in Linear Domain. Among them, the resolution of piezoelectric equations by numerical methods is currently used. Another method is based on the equivalent electrical circuit simulation : Pspice or VHDL–AMS tools. This article proposes VHDL-AMS model for a pulse echo ultrasonic system. The simulation is based on the动脉 发表于 2025-3-26 14:58:02
Application of Laser-Ultrasound to Non-contact Temperature Sensing of Heated Materialsof a heated material. The principle of the temperature measurement is based on temperature dependence of the velocity of the surface acoustic wave (SAW) or longitudinal wave (LW) propagating through a material. An effective method consisting of ultrasonic pulse-echo measurements and an inverse analycalamity 发表于 2025-3-26 19:46:30
http://reply.papertrans.cn/83/8230/822987/822987_30.png