散布
发表于 2025-3-28 15:19:29
Elastic Constants of Austenitic and Martensitic Phases of NiTi Shape Memory Alloys methods. The comparison of elastic constants of the twinned NiTi martensite with those for perfect crystals helps us to understand the transition from elastic to pseudoplastic behavior of NiTi alloys. The results indicate that the elastic response is not influenced by the presence of the twins.
obligation
发表于 2025-3-28 19:28:17
http://reply.papertrans.cn/83/8229/822882/822882_42.png
SMART
发表于 2025-3-28 23:35:29
Discrete-Difference Filter in Vehicle Dynamics Analysisdata obtained from testing manoeuvre. Bicycle model of a vehicle was used for state description and lateral dynamics investigation. Filter implementation in Matlab-Simulink software environment was used for analysis and comparison with earlier results published in .
embolus
发表于 2025-3-29 07:01:29
3D Slide Bearing Model for Virtual Engineed with a numerical solution. The finite difference method with non-uniform integration step is introduced for the numerical solution. The results achieved using the slide bearing computational model help to develop modern diesel engines in the area of noise, vibrations and fatigue of the main parts.
obsession
发表于 2025-3-29 10:14:27
http://reply.papertrans.cn/83/8229/822882/822882_45.png
反复拉紧
发表于 2025-3-29 14:47:09
http://reply.papertrans.cn/83/8229/822882/822882_46.png
ALOFT
发表于 2025-3-29 16:56:51
http://reply.papertrans.cn/83/8229/822882/822882_47.png
业余爱好者
发表于 2025-3-29 21:01:06
Design of Capsule Pressure Sensors Thermal CompensationS was used for verify of capsule thermal compensation. The main goal of the project is the research of complex smart pressure sensor based on the new sensing system with galvanic fiber optic isolation including research and experimental validation of this new pressure sensing principle.
细微差别
发表于 2025-3-29 23:57:10
Synthetic Method of Complex Characteristics Evaluation Exemplified by Linear Stepper Actuator Characracteristic curve. Because it does not use particular features of stepper motors characteristics, it can be used to comparisons of all characteristic types. Especially these ones, in which an area under a curve is important, what is happening i.e. when estimating absorption.
OPINE
发表于 2025-3-30 06:58:53
http://image.papertrans.cn/r/image/822882.jpg