Decrepit
发表于 2025-3-27 00:32:42
http://reply.papertrans.cn/83/8229/822862/822862_31.png
SPASM
发表于 2025-3-27 01:29:27
http://reply.papertrans.cn/83/8229/822862/822862_32.png
Ancillary
发表于 2025-3-27 08:54:19
Design and Analysis of Mould for Maintaining the Longitudinal Integrity of Bio Fiber During Composiy, eco-friendliness, and a growing focus on the environmental and sustainability aspects of engineering materials. Natural fibers present in a short and unequal configuration in nature. Yarns are having an inherent twist in them because it is difficult to maintain the longitudinal integrity during t
Root494
发表于 2025-3-27 09:54:05
Parametric Study on Strength Performance of Geopolymer Concrete Using Industrial By-Products, emissions. Geopolymers are significant in this environment, and various studies have considered a range of substances as suitable binder materials. In this dissertation, the workability and mechanical properties of geopolymer concrete mixes made using industrial by-products such as fly ash (FA) and
Wernickes-area
发表于 2025-3-27 15:47:24
Evaluation of the Mechanical and Physical Properties of the Modified Paver Block by Using Waste Plasearch field for the betterment of the environment. Plastic waste is increasing demand in sectors such as Building and Construction, Textiles, Consumer & Institutional Products, Transportation, Electrical/Electronic, and Industrial Machinery. From which construction sector have a significant and fas
生锈
发表于 2025-3-27 21:08:42
,3D Printing with Polymer Composites Materials, Processes and Applications—A Review, this technology has attracted a lot of attention and achieved international renown. The focus of study continues to be on technological developments, notably in the field of material science, especially in light of potential future developments. Due to their mass customisation, design freedom, capa
cylinder
发表于 2025-3-28 00:51:56
Design Analysis of Universal Joint by Using Different Materials,s, allowing the transmission of torque. Generally, it consists of two hinges that are closely spaced, oriented at 90° to one another, and joined by a cross shaft. The yoke shaft connected to the engine is known to as the input shaft, while the other is called to as the output shaft. About 25% of the
eucalyptus
发表于 2025-3-28 04:23:20
http://reply.papertrans.cn/83/8229/822862/822862_38.png
遍及
发表于 2025-3-28 08:53:34
http://reply.papertrans.cn/83/8229/822862/822862_39.png
Resistance
发表于 2025-3-28 14:23:18
http://reply.papertrans.cn/83/8229/822862/822862_40.png