广大
发表于 2025-3-23 13:13:27
http://reply.papertrans.cn/83/8229/822861/822861_11.png
压倒性胜利
发表于 2025-3-23 14:15:16
Comparative Performance Analysis of Different Membership Functions on Fuzzy Logic-Controlled Solar is to carry out performance comparative analysis of a fuzzy logic controller with different membership functions and linguistic variables. Here, for the analysis purpose, the fuzzy logic controller has been designed for solar tracking system using Matlab/Simulink module.
FIN
发表于 2025-3-23 21:50:23
Modeling, Simulation, and Stress Analysis of Bone Scaffold Using Different Biocompatible Materials, mechanical properties of the bone scaffold will also be predicted. The effect of change in material for same porosity and the material is found out via finite element analysis (FEA) and ANSYS 19.2 application analysis software. The comparative results among used materials identify the best possible biocompatible material for a 3D bone scaffold.
Intend
发表于 2025-3-24 01:39:06
http://reply.papertrans.cn/83/8229/822861/822861_14.png
Calibrate
发表于 2025-3-24 05:31:09
http://reply.papertrans.cn/83/8229/822861/822861_15.png
calumniate
发表于 2025-3-24 09:22:16
http://reply.papertrans.cn/83/8229/822861/822861_16.png
Admonish
发表于 2025-3-24 14:35:28
http://reply.papertrans.cn/83/8229/822861/822861_17.png
搜集
发表于 2025-3-24 18:22:31
Mechanical and Dynamic Characteristics of Natural Fibre Composites Using Banyan Tree Aerial Roots,nical properties like the tensile test, flexural test and impact test. Now, different propotions of calcium oxide (CaO) was added along with epoxy resin and the natural fibre composite was made from the fibers of banyan tree aerial roots. The mechanical properties of the manufactured composite component have been tested, and results were compared.
制度
发表于 2025-3-24 19:38:11
Numerical Simulation of Friction Stir Welding Process to Investigate the Material Flow in AA7020,r three conditions, namely sliding, partial sticking, and sticking conditions, and observations were made on material flow. From the simulation results, it is observed that for good material flow, sticking condition is preferable.
ABIDE
发表于 2025-3-25 01:37:09
http://reply.papertrans.cn/83/8229/822861/822861_20.png