噱头
发表于 2025-3-30 09:54:04
Effect of Welding Speed on Phase Transformation and Mechanical Properties of Laser-Welded NiTi Shapect of scanning speed on phase transformation and mechanical properties was investigated. The DSC analysis of base material and welded joints results less variations in austenite and martensite temperature phase transformation because during laser welding process there was not the presence of new ph
不能逃避
发表于 2025-3-30 15:36:36
http://reply.papertrans.cn/83/8229/822851/822851_52.png
干旱
发表于 2025-3-30 20:34:56
Application of Multiple Regression Analysis for Wire Electrical Discharge Machining of Stainless Stapplications like cryogenic vessels, valves, refrigerator equipment and evaporators due of its higher corrosion resistance, ductility and ability to remain as solid up to a temperature of 1400 °C. SS304 is one of the harder to machine material by traditional machining approaches. Wire Electrical Dis
菊花
发表于 2025-3-30 22:15:53
http://reply.papertrans.cn/83/8229/822851/822851_54.png
mastopexy
发表于 2025-3-31 01:22:51
Strength Properties of Mortar Using Industrial Waste,r. The strength properties of mortars for combining Stone Dust (SD) for River Sand (RS) and several levels of Granite Powder (GP) as replacements for cement and 5% of Aluminium Hydroxide (AH) as Extract are deliberated in the paper. This study involves the replacement levels of the GP to cement 0%,
Camouflage
发表于 2025-3-31 09:03:58
,Performance and Emissions Characteristics of Soyabean Biodiesel in Compression Ignition Engine,Ether nano additives). The optimized B20 + 15% DEE fuel blend significantly impacted and improved efficiency, reducing CO and HC emissions compared to B20. For B20 + 15% DEE, there was a substantial increase in NOx at peak load for this fuel blend.
不可比拟
发表于 2025-3-31 12:31:20
http://reply.papertrans.cn/83/8229/822851/822851_57.png
hidebound
发表于 2025-3-31 13:57:39
,Robotic Utilization in Farming Field—A Review,ology with traditional farming methods. Finally, based on the current survey, it is identified that the essay also discusses the present and future robotics developments in additional agricultural domains, as well as potential research problems.
assail
发表于 2025-3-31 21:01:12
Investigating the Microhardness Values of SS316L of Hybrid Additive Manufacturing and Micromilling micromilling process must be studied. It uses surface roughness to evaluate and classify the effect of workpiece performance on micromilling. According to the different process parameters of the micromilling process, significant changes in the microhardness results were found.
辞职
发表于 2025-3-31 22:34:14
http://reply.papertrans.cn/83/8229/822851/822851_60.png