Anticlimax
发表于 2025-3-28 16:10:15
Influence of Stacking Sequence and Hybridization on the Tribological Properties of Jute/Carbon/Glasss has been investigated experimentally and compared with the non-hybrid base material of jute/glass/carbon fibers. The hand lay-up method was used to fabricate the composite samples and cured them under light pressure at room temperature for 72 h. All the specimens were fabricated by varying the sta
Transfusion
发表于 2025-3-28 21:02:51
Parameter Optimization of Friction Stir Welding of Aluminum Alloy-AA 5083 Using Novel Ant Lion Algorat is generated by the non-consumable tool which is used to weld the work piece. The quality of the weld is influenced by several parameters such as welding speed, rotational speed, and tool tilt angle. In this paper, the quality of friction stir welded aluminum alloy AA 5083 is optimized. Full fact
nocturia
发表于 2025-3-29 01:19:56
http://reply.papertrans.cn/83/8229/822848/822848_43.png
亲属
发表于 2025-3-29 04:59:52
http://reply.papertrans.cn/83/8229/822848/822848_44.png
Herd-Immunity
发表于 2025-3-29 11:02:09
http://reply.papertrans.cn/83/8229/822848/822848_45.png
雄辩
发表于 2025-3-29 13:35:07
Effects of ER5356 and ER5183 Filler Rods on the Mechanical and Metallurgical Properties of TIG-Weldespectively. The best filler rod is recognized among these investigated filler materials utilized for welding based on the quality of weld produced which are also defect-free. The microstructural and mechanical properties are studied to find out the best filler rod. The microstructural analyzes of va
典型
发表于 2025-3-29 18:58:29
http://reply.papertrans.cn/83/8229/822848/822848_47.png
emulsify
发表于 2025-3-29 23:30:42
http://reply.papertrans.cn/83/8229/822848/822848_48.png
GULLY
发表于 2025-3-30 02:25:49
http://reply.papertrans.cn/83/8229/822848/822848_49.png
Odyssey
发表于 2025-3-30 06:39:04
http://reply.papertrans.cn/83/8229/822848/822848_50.png