Gentry
发表于 2025-3-25 03:34:29
Prediction of Surface Roughness in Turning of EN19 Steel Using Acoustic Emission estimated during the machining process itself without removing the workpiece. EN19 (AISI 4140) steel round stock is taken and is turned at different speeds, feeds and depths of cut parameters combination. The surface roughness values of the turned workpieces were measured separately. Sound generate
Frequency
发表于 2025-3-25 09:16:42
http://reply.papertrans.cn/83/8229/822845/822845_22.png
集聚成团
发表于 2025-3-25 12:14:38
Surface Modification of AA 6351 for Improvement of Mechanical Properties Using Friction Stir Processniform distribution of SiC particles. The hardness of the introduced composite surface was also improved. The produced composite surface has high tensile strength compared to unprocessed base workmetal.
delta-waves
发表于 2025-3-25 16:15:10
Regression Model Developed Using RSM for Predicting Withstanding Pressure of HDPE Pipe During Extrusdel were compared with experimental outcome and found to be in good agreement. The results of the predicted model can be used as selected control parameters to ensure the desired quality of HDPE pipe.
Credence
发表于 2025-3-25 23:03:53
Experimental Investigations on Mould Dilation Characteristics of Synthetic Greensand Systems Using Fe sand system, the bentonite as a binder is employed in different amounts. The experimental investigations are determined to obtain the optimum range of mould hardness, compressive strength, bulk density, permeability and grain-size distribution which have a greater influence on minimizing the mould
resistant
发表于 2025-3-26 01:29:36
Experimental Testing and Evaluation of Coconut Coir/Rice Husk Fiber Reinforced with Polymer Composittigated by using computerized universal testing machine. The results finally concluded that 5% volume fraction composites play the best performance than the other ones because of their bonding strength and dispersion in the structure of the matrix.
anthropologist
发表于 2025-3-26 05:30:39
Fabrication and Corrosion Behaviour of Aluminium Hybrid and Non-hybrid MMCs Reinforced with B4C andby using same aluminium used as matrix and are reinforced with fixed percentage of soft solid lubricant Gr (3%) along with varying percentages of B.C (3, 6, 9, 12 and 15%). All these composites are fabricated by using powder metallurgy technique; FESEM and microstructural analysis shows the presenc
adipose-tissue
发表于 2025-3-26 10:56:21
http://reply.papertrans.cn/83/8229/822845/822845_28.png
LEERY
发表于 2025-3-26 13:45:57
http://reply.papertrans.cn/83/8229/822845/822845_29.png
不幸的人
发表于 2025-3-26 17:24:28
http://reply.papertrans.cn/83/8229/822845/822845_30.png