名义上 发表于 2025-3-28 14:54:05
http://reply.papertrans.cn/83/8229/822842/822842_41.pngAmendment 发表于 2025-3-28 19:28:53
http://reply.papertrans.cn/83/8229/822842/822842_42.png束以马具 发表于 2025-3-29 00:23:38
http://reply.papertrans.cn/83/8229/822842/822842_43.pngINCH 发表于 2025-3-29 03:14:02
http://reply.papertrans.cn/83/8229/822842/822842_44.pngtheta-waves 发表于 2025-3-29 08:40:15
A Preliminary Investigation on Different Tool Wears in Sustainable Electrical Discharge Machining othe workpiece material due to continuous recurring electrical discharges between the tool electrode and workpiece. Irrespective of the physical and mechanical properties of the workpiece material, this process can able machine any electrically conductive material. Tool electrode wear is unavoidablesomnambulism 发表于 2025-3-29 11:37:42
A Review on Microstructure and Mechanical Properties of L-PBF 17-4PH and 15-5PH SS,layer by layer manner using engineering design. Metallic components in all fields can be produced by Additive manufacturing because of its near net shape production and high quality production. Many Steels can be processed using Additive manufacturing methods. 17-4PH and 15-5 PH Stainless Steels are套索 发表于 2025-3-29 19:22:47
http://reply.papertrans.cn/83/8229/822842/822842_47.png母猪 发表于 2025-3-29 22:21:02
http://reply.papertrans.cn/83/8229/822842/822842_48.pngSTELL 发表于 2025-3-30 01:55:45
ABS-Fly Ash Composite Filaments for Fused Deposition Modeling,cations of FDM mostly utilized pure polymers such as polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS). However, there has recently been an increasing demand for composite FDM filaments to obtain superior mechanical and physical properties. Fly ash (FA), a waste of coal power plants, i宽宏大量 发表于 2025-3-30 06:58:00
A Comparative Study and Optimization of Parameters of Turning UD-GFRP in Dry, Wet and Cryogenic Conites are very difficult for machines due to non-homogeneous and anisotropic environment and it require unique cutting tools. This work is going to investigate a comparative study of various conditions like Dry condition, Wet condition, and Cryogenic condition machining (turning) of UD-GFRP composite