衍生
发表于 2025-3-25 06:30:59
http://reply.papertrans.cn/83/8229/822841/822841_21.png
Pulmonary-Veins
发表于 2025-3-25 09:56:56
Tribological Behaviour of Silicon Carbide Reinforced AA2024 Composites,been triggered by many analysts and it became a significant region of study in material science. AA2024 was employed as matrix material and SiC particulate is added as reinforcement. Average grain size of SiC particulates was 75 nm. Due to high physical strength and specific modulus with good therma
无节奏
发表于 2025-3-25 12:16:47
Study on the Effect of Heat-Treatment on Microstructure and Corrosion Resistance of 0.6% Carbon Ste been investigated. Heating of the samples were done at 910 ℃ in a muffle furnace for 2 h. After that samples were cooled in the same furnace (annealing), air (normalizing) and water (Quenching). Followed by a detailed microstructural characterization was done using optical microscopy and XRD techni
esthetician
发表于 2025-3-25 17:15:23
http://reply.papertrans.cn/83/8229/822841/822841_24.png
Ambulatory
发表于 2025-3-25 23:51:13
http://reply.papertrans.cn/83/8229/822841/822841_25.png
Inexorable
发表于 2025-3-26 01:37:08
http://reply.papertrans.cn/83/8229/822841/822841_26.png
WITH
发表于 2025-3-26 07:25:47
Microstructure Evolution in Medium Mn, High Al Low-Density Steel During Different Continuous Coolinent, followed by different cooling regimes. The alloy was homogenized at 1200 ℃ for 3 h followed by forging and water quenching to room temperature. Thereafter it was heat-treated in a two-phase region and cooled to room temperature through different cooling modes viz. water quenching (WQ), air cool
aspect
发表于 2025-3-26 12:03:29
Phonon Dynamics and Collective Excitations in Cu60Zr20Hf10Ti10 Bulk Metallic Glass,pplications of BMGs based upon their excellent thermodynamic, elastic, magnetic, electronic transport and superconducting properties. Their properties like high strength, good formability, corrosion resistance etc. attract researchers to experimentally explore or theoretically predict some novel app
同时发生
发表于 2025-3-26 13:04:05
Microstructure and Texture Study of High Temperature Upset Forged 304LN Stainless Steel, s.. The deformed samples have been characterized through electron back scattered diffraction. A recrystallized microstructure was observed at all the deformation temperatures except 900 ℃. Traces of δ ferrite formation have been observed for all the above mentioned temperatures. Development of anne
建筑师
发表于 2025-3-26 19:06:23
http://reply.papertrans.cn/83/8229/822841/822841_30.png