火光在摇曳
发表于 2025-3-26 22:49:49
http://reply.papertrans.cn/83/8229/822838/822838_31.png
流利圆滑
发表于 2025-3-27 02:44:09
http://reply.papertrans.cn/83/8229/822838/822838_32.png
香料
发表于 2025-3-27 07:36:09
Experimental and Numerical Investigations of Effects of Wall Friction and Vibrational Amplitude on C convection in 2D granular bed under vertical vibrations. The polymethyl methacrylate (PMMA) was used as the particle to prepare a granular sample. The coefficient of interparticle friction (.) is equal to 0.5. On the other hand, the coefficient of particle–wall friction (.) was systematically varie
Hdl348
发表于 2025-3-27 12:40:03
Comparative Study of Radiative Flux from Mushroom BLEVE Modelevel with commercial butane under a certain pressure. The radiative flux is estimated from fireball Bleve which has a geometrical form resembling that of a mushroom. The results are calculated based on a proposed mathematical model, and then compared with those obtained by the dynamic forecasting mo
FRONT
发表于 2025-3-27 16:05:18
http://reply.papertrans.cn/83/8229/822838/822838_35.png
Redundant
发表于 2025-3-27 21:01:19
Optimization of the Weight and Size Characteristics of the Power Bracket for Additive Manufacturinglength was constructed. The results of the conducted research led to the conclusion that it is possible to reduce the mass of the part without loss in mechanical properties, such as density, tensile and yield strength and von Mises stresses.
Individual
发表于 2025-3-27 22:19:50
SHS Extrusion of a Composite Material Based on Aluminum-Magnesium Spinel rate has the greatest influence on the process of SHS extrusion of the studied material. It is shown that changing the value of this parameter makes it possible to obtain both compact and hollow rods.
追踪
发表于 2025-3-28 04:14:26
2195-4356 ts across the globe.Covers latest research in manufacturing This book comprises state-of-the-art papers in manufacturing engineering & processes including computer-aided design and manufacturing, environmentally sustainable manufacturing processes, modelling, analysis, and simulation of manufacturin
indenture
发表于 2025-3-28 10:12:10
http://reply.papertrans.cn/83/8229/822838/822838_39.png
很像弓]
发表于 2025-3-28 13:41:12
http://reply.papertrans.cn/83/8229/822838/822838_40.png