演绎
发表于 2025-3-23 11:17:23
A Review on Frequency Domain Analysis Approach for Parametric Identification of Nonlinear Jointsnalysis method for nonlinear system parametric identification in structural dynamics and the key developments in this area of research. Finally, identification of findings is done which provides a pathway for the future direction of research work in this area.
cardiac-arrest
发表于 2025-3-23 15:17:54
Design Exploration of Stewart Platformeful trends are generated for each case. These results are then validated by Adams simulations with a very close confirmation. The trends presented in the paper could prove extremely helpful for designers to obtain the configuration with improved range of motion in any of the six degrees-of-freedom motions.
Foreknowledge
发表于 2025-3-23 19:06:05
http://reply.papertrans.cn/83/8229/822834/822834_13.png
失望昨天
发表于 2025-3-24 01:12:24
http://reply.papertrans.cn/83/8229/822834/822834_14.png
Musket
发表于 2025-3-24 04:11:43
http://reply.papertrans.cn/83/8229/822834/822834_15.png
Employee
发表于 2025-3-24 08:09:58
Studies on Coupler Curves of a 4-Bar Mechanism with One Rolling Pair Adjacent to the Groundg pair. Such rolling pairs provide the advantage of being friction and clearance free. In this paper, circle-on-circle and circle-on-line type of rolling pairs have been explored. This arrangement introduces three additional design variables to study the continuous change in the shape of the coupler
撕裂皮肉
发表于 2025-3-24 12:24:16
Kinematic Synthesis and Design of a Five Fingered Hand Exoskeleton part of the kinematic chain is used for each finger. The links are attached to the proximal and distal phalanges. For the thumb, a planar 6-link mechanism directly connected at the distal phalanx is used. The kinematic synthesis of the mechanism based on Burmester Theory was performed with two prin
发酵剂
发表于 2025-3-24 16:23:17
Structural Enumeration of Cam-Modulated Linkagess a means to aid creative thinking in the design of mechanisms. We know that a binary link, along with its pin joints can be directly converted to a higher pair without changing the degrees of freedom of the resulting linkage. This produces new types of linkage in which both lower and higher pairs c
GUEER
发表于 2025-3-24 20:43:25
Studying the Effects of Varying Link Lengths in Double Lambda Mechanism and Its Application to Roverthis problem, use of linear motion suspension systems has been proposed. The double lambda rocker-bogie suspension is an example of one such system. However, in the double lambda rocker-bogie suspension, the ground clearance is limited due to presence of linkages. We study methods to improve ground
喊叫
发表于 2025-3-25 01:30:47
Positional Error Estimation of Five-Bar Mechanism Under the Influence of Tolerances new method is developed to analyze the effect of link tolerance on the end effector‘s positioning. The proposed method‘s results are validated by comparing the graphical methods and CAD Model Simulation. The forward and inverse kinematics of the five-bar mechanism are analyzed for ten different pos