HPA533
发表于 2025-3-23 12:36:35
http://reply.papertrans.cn/83/8228/822771/822771_11.png
鬼魂
发表于 2025-3-23 15:58:43
http://reply.papertrans.cn/83/8228/822771/822771_12.png
BRAWL
发表于 2025-3-23 21:38:47
Estimation of State Space Model of a Power Hydraulic System Using Subspace Identification Algorithmut and output data. Both the traditional (TSID) and parsimonious subspace identification have been used in estimation process, and one trade-off is observed between TSID and PARSIM that TSID is a more efficient estimation algorithm where no step change occurs, but with a step change in response, PAR
窃喜
发表于 2025-3-23 23:01:49
The Inverse Kinematics Problem of the Generalised Stanford Armbe the general case of the Stanford arm robot. Although the IKP of the Stanford arm is well established in the literature, solving its general form is not a trivial problem. The contributions of the paper include elaborating the solution procedure based on the Raghavan–Roth formulation and viewing t
parallelism
发表于 2025-3-24 04:11:46
Design and Development of a Three-Link Rigid-Flexible Manipulatoric joint and two revolute joints to obtain the three-dimensional workspace. Before fabrication of the real setup, CAD (computer-aided design) model was built, and analysis was done to get an optimized structural design. Both the rotating links can translate together in vertical direction using the p
capsaicin
发表于 2025-3-24 07:30:47
Comparative Study on Hydraulic Pressure Pulsation Characteristics in Simple and Regenerative Hydraulverload in the engineering sector. This article is the study of pressure pulsation on two different hydraulic systems, simple and regenerated hydraulic systems. The pressure pulsation observed in both systems was different for the different loading conditions. Simple hydraulic systems reduced the fr
扩张
发表于 2025-3-24 13:34:15
Localization of a Drone for Landing Using Image-Based Visual Servoing with Image Momentsg of such vehicles. A major problem is that when trying to design a control algorithm for the landing procedure, it is difficult to accurately measure the 3D pose of the vehicle with respect to the local environment. Three dimensional pose estimation and subsequent corrections in velocity to design
lethal
发表于 2025-3-24 17:55:17
http://reply.papertrans.cn/83/8228/822771/822771_18.png
MAUVE
发表于 2025-3-24 22:06:17
Surface Electromyography-Controlled Mechanical Hand: A Design Approached to perform dexterous tasks performed by humans in an environment unsuitable for humans, or as prostheses, etc. In doing so, a user interface like a man–machine interface is required to control the development of motion of the mechanical hand. One such method uses surface electromyography (sEMG).
冷漠
发表于 2025-3-24 23:30:20
http://reply.papertrans.cn/83/8228/822771/822771_20.png