STERN
发表于 2025-3-28 17:14:07
http://reply.papertrans.cn/83/8227/822676/822676_41.png
corpus-callosum
发表于 2025-3-28 22:35:39
,Coupled Thermomechanical Analysis of Shape Memory Alloy Actuator,rmation inside them. Modeling its behavior accurately requires coupled thermomechanical analysis, considering latent heat term during phase transformations, thermoelastic heat terms, thermal and mechanical loading, boundary conditions, etc. Moreover, the variation of material properties, e.g., modul
雪崩
发表于 2025-3-29 01:58:10
Multistability of Connected Variable Stiffness Laminates,. Unsymmetrical cross-ply laminates, which yield two stable cylindrical shapes, are widely investigated multistable structures, where the multistability is induced due to the residual thermal stresses. However, to improve the design space in such laminates, variable stiffness (VS) laminates with cur
gerrymander
发表于 2025-3-29 03:39:21
A Scaling Procedure for Predicting Pressure Fluctuations Caused by Fluid Transient in Cryogenic Sysphenomena. The analysis and experimentation of such system are made easy by developing scale-down models and performing numerous tests. A scaling procedure solely to fluid transient phenomena is developed by non-dimensionalizing the governing equations of fluid transient. The approach for developing
你正派
发表于 2025-3-29 08:10:06
,A Review of the Discrete Element Method for Modelling the Rheology of Fresh Concrete,ing and segregation, de-airing, etc., of freshly cast concrete. It is essential to have a better understanding of the rheology of cement and concrete to solve these problems. Concrete rheology has to fulfil fluidity and compaction requirements to ensure structural integrity. It is essential to under
为现场
发表于 2025-3-29 14:20:23
Estimation of Instantaneous Shear Modulus in Neat Resin and Multi-walled Nanotube-Reinforced Carbon-05 and finite element analysis by Solid 46 available in ANSYS element library. In the present work, SHELL 281 is selected from ANSYS library to predict interlaminar shear strength and instantaneous shear modulus. SHELL element showed very good convergence with reference to experimental work.
抚慰
发表于 2025-3-29 17:33:32
http://reply.papertrans.cn/83/8227/822676/822676_47.png
Duodenitis
发表于 2025-3-29 22:25:59
,Exploring Self-Sensing Behaviour of Shape Memory Alloy Using Kalman Filters Based on Boyd and Lagouation generated by the SMA wire actuator is estimated following the variation in its electrical resistance. Employing the temperature and stress of SMA wire actuator as the state variables, the non-linear system dynamics required for the EKF are derived from the discretized heat transfer relation an
Minutes
发表于 2025-3-30 02:52:04
Effect of Creep Deformations on the Performance of Geosynthetic Reinforced Tiered Retaining Walls,nce, cost, and speedy construction. When the height of backfill soil is greater than what can be efficiently retained by a single tier wall, multi-tiered retaining walls become necessary. As these multi-tiered walls are built to be served for a long time, there is a need to quantify the time-depende
Decimate
发表于 2025-3-30 07:09:38
Electro-Elastic Analysis of Edge Dislocation Dipole in GaN Using XFEM,ductor material. The extended finite element method (XFEM) is adopted for the solution of the linear piezoelectric problem. In XFEM, both the displacement and electric field discontinuities of the Volterra dislocations are modeled with the help of the Heaviside enrichment function. A line charge is