天文台
发表于 2025-3-28 14:45:42
Composite Capsule Tube for Underwater Systemness, and design tailoring capability of composite plies. The capsule tube with large length-to-diameter ratio is designed with carbon/epoxy composite plies and analysed by finite element software. The joining of tube with subsequent sections is also configured for easy assembly. Different load scen
prediabetes
发表于 2025-3-28 18:50:27
Analysis and Repair of Delaminated Continuous Helical Ply in a Composite Pressure Vesselhelical, hoop and fabric layers is the major technology used for manufacturing of pressure vessel. The vessel is subjected to non-destructive examination after manufacture and defect study is done. Delamination in the composite plies is identified, mapped and analysed through finite element software
SOBER
发表于 2025-3-28 23:37:58
http://reply.papertrans.cn/83/8227/822655/822655_43.png
外来
发表于 2025-3-29 04:51:18
http://reply.papertrans.cn/83/8227/822655/822655_44.png
冒失
发表于 2025-3-29 11:01:01
http://reply.papertrans.cn/83/8227/822655/822655_45.png
cartilage
发表于 2025-3-29 11:51:39
Analytical Approach for Densification of Carbon–Carbon Composites Through Isothermal and Isobaric Chmic matrix composites (CMC). The two governing aspects of CVI process are reaction rate and mass transport phenomenon. These dictate the process parameters required to enhance the densification rate and minimize density gradients. However, there is an intrinsic conflict between favorable conditions
现存
发表于 2025-3-29 15:50:27
Lost Mandrel-Based In-Situ Skirts for Composite Rocket Motor Casingges in the realization of large-sized composite rocket motor casings (CRMCs). A unique methodology involving the lost mandrel technique is conceptualized and implemented in manufacturing of in-situ composite skirts for CRMCs. Pre-fabricated composite sleeves are used as interim mandrels that act as
大量杀死
发表于 2025-3-29 22:59:37
http://reply.papertrans.cn/83/8227/822655/822655_48.png
扩张
发表于 2025-3-30 03:21:07
http://reply.papertrans.cn/83/8227/822655/822655_49.png
四溢
发表于 2025-3-30 05:02:53
http://reply.papertrans.cn/83/8227/822655/822655_50.png