Schlemms-Canal
发表于 2025-3-28 18:36:05
Removal of CO2 in a Multistage Fluidized Bed Reactor by Activated Carbon Prepared from Green Coconutthe four stage fluidized bed reactor were investigated. The percentage removal of carbon dioxide was found to be 65 % when the flow rate of the solid is high and the flow rate of gas is low with maximum weir height of 60 mm and inlet carbon dioxide (CO.) concentration of 3000 ppm at room temperature.
absorbed
发表于 2025-3-28 20:57:38
Comparative Study for Removal of Cr(VI) Using Sweetlime Peel Powder and Lemon Peel Powder in A Fixedwith decrease in both bed height and flow rate. The fit of various models such as Bohart-Adams, Yoon-Nelson and BDST were tested by applying experimental data gathered from dynamic studies performed in fixed bed column.
浓缩
发表于 2025-3-29 01:32:42
http://reply.papertrans.cn/83/8227/822638/822638_43.png
molest
发表于 2025-3-29 04:26:14
Numerical Study of Heat Transfer Characteristics of Nano-fluids in Channel Containing Different Shapconfined with inline noncircular tubes. The computational channel has aspect ratios of 10 × 0.66 cm. with five different circular and non-circular tubes placed in series one after another. The 2D numerical simulation has been solved for different Reynolds number (.) and the heat transfer coefficient
小木槌
发表于 2025-3-29 07:51:46
A Numerical Investigation Based on Heat Transfer and Fluid Flow Characteristics of Air in a Circularal model of an isothermal-fluxed circular duct with alternating inclined ribs. The effects of artificial inclined rib’s roughness on heat transfer and fluid flow have been investigated. A 2-D numerical simulation is performed using the ANSYS FLUENT 15 code. The simulation is conducted in order to ga
licence
发表于 2025-3-29 13:09:49
http://reply.papertrans.cn/83/8227/822638/822638_46.png
得意牛
发表于 2025-3-29 17:07:58
Thermohydraulic Transport Characteristics of Micro Mixer in Micro Channelcro-channel of an isothermal-fluxed wall of a circular shape micro mixer. In particular, a simulatory model has been established using computational fluid dynamics (CFD), i.e., Ansys Fluent 14.5 to investigate such effect. The formulations are done by the laminar flow model, since the flow is assume
nocturia
发表于 2025-3-29 21:39:56
http://reply.papertrans.cn/83/8227/822638/822638_48.png
中和
发表于 2025-3-30 02:25:32
http://reply.papertrans.cn/83/8227/822638/822638_49.png
caldron
发表于 2025-3-30 05:56:36
http://reply.papertrans.cn/83/8227/822638/822638_50.png