CT-angiography
发表于 2025-3-26 22:36:25
http://reply.papertrans.cn/83/8226/822574/822574_31.png
深陷
发表于 2025-3-27 01:31:23
http://reply.papertrans.cn/83/8226/822574/822574_32.png
上流社会
发表于 2025-3-27 06:39:57
Experimental Investigation of the Performance of a Low-Cost Flexible All Plastic Solar Air Heater,ags. One plastic bag is transparent and the other one is black. The black plastic bag is placed inside the transparent one. When the air is blown through the black plastic bag, both the bags inflate and take the shape of a concentric cylinder. The incident solar radiation on the surface of the heate
CRACY
发表于 2025-3-27 12:29:25
http://reply.papertrans.cn/83/8226/822574/822574_34.png
LINE
发表于 2025-3-27 14:35:34
Optimization of MRR and KW of SS 304 in Wire EDM by RSM Technique,c off time, wire feed and servo voltage) on the responses (such as material removal rate and surface roughness) in Wire EDM. L27 orthogonal array offers to minimize the experimental run number and to analyze the effects of significant process parameters on the performance characteristics, the RSM (R
Orchiectomy
发表于 2025-3-27 21:05:36
Numerical Study on Effects of Geometrical and Operating Parameters of Bolt on Performance of Boltedsubjected to vibrations of structure or machine. This vibrational loosening sometimes can cause serious problems leading to fatal failure of bolted structure, if remain undetected. In this study, a numerical investigation on loosening of bolted joint when subjected to dynamic transverse load is carr
抱负
发表于 2025-3-27 23:51:00
Effect of Electrode Length and AC Frequency on Mixing in a Diamond-Shaped Split-And-Recombine Electgents and chemicals is often essential to assist the chemical and biological reactions. Electroosmotic flow is an attractive approach for enhancing the homogeneous mix of species in a micro-scale mixer. In this work, a two-dimensional microfluidic mixture with a diamond-shaped split-and-recombine st
FOIL
发表于 2025-3-28 04:30:19
Parametric Optimization of Tribological Process Parameters and Their Comparative Effect on Wear Resunterbody is carried out. L. orthogonal array is used to design the experimental run and Grey-relational analysis has been conducted to obtain the best suitable combination of tribological parameter. Further, mean response and analysis of variance has been performed to investigate the most influenti
Tailor
发表于 2025-3-28 06:39:41
http://reply.papertrans.cn/83/8226/822574/822574_39.png
CONE
发表于 2025-3-28 13:01:18
http://reply.papertrans.cn/83/8226/822574/822574_40.png