CHOP
发表于 2025-3-25 06:47:10
http://reply.papertrans.cn/83/8219/821899/821899_21.png
agnostic
发表于 2025-3-25 11:04:16
Modelling of Reactive Sputtering Processes,satisfactory controlled over large processing areas. Sputtering is normally carried out in an argon ambient. Not only elemental pure single metal targets may be used, but also metal alloys can be sputtered which offers the possibility to deposit also complex coatings. Common for all inert argon sput
Paraplegia
发表于 2025-3-25 15:38:04
Depositing Aluminium Oxide: A Case Study of Reactive Magnetron Sputtering,etron sputter process. The choice for this combination of target material and reactive gas is given by the fact that the well-known hysteresis behaviour, described in the previous chapter, is clearly demonstrated for this combination. Two key aspects of the process are responsible for this behaviour
大暴雨
发表于 2025-3-25 17:34:07
http://reply.papertrans.cn/83/8219/821899/821899_24.png
EXULT
发表于 2025-3-25 22:37:11
Energy Deposition at the Substrate in a Magnetron Sputtering System, to understanding the mechanism of film growth on the surface . For low-pressure plasmas, such as with the magnetron sputtering process, these particles include electrons, ions, neutrals, etc. , which interact with the surfaces and each other through collisions and or chemical reactions.
可用
发表于 2025-3-26 01:27:59
http://reply.papertrans.cn/83/8219/821899/821899_26.png
拱形面包
发表于 2025-3-26 07:49:19
Optical Plasma Diagnostics During Reactive Magnetron Sputtering,s or their corresponding nitride and oxide compounds..Since the 70s, several plasma diagnostics tools have been developed . Amongst them, optical diagnostic methods are playing a very important role to characterize magnetron plasmas. Optical diagnostics are “in situ” experimental methods which
Microaneurysm
发表于 2025-3-26 12:07:57
Reactive Magnetron Sputtering of Indium Tin Oxide Thin Films: The Cross-Corner and Cross-Magnetron ptical transparency and low electrical resisitivity. To realise this homogeneously over the whole substrate in the case of dynamic deposition in an inline sputtering system necessitates a very homogeneous process in the case of static deposition, i.e. using fixed substrates..During these static depo
TAG
发表于 2025-3-26 16:17:19
http://reply.papertrans.cn/83/8219/821899/821899_29.png
Hyperplasia
发表于 2025-3-26 18:44:15
Reactive SputteredWide-Bandgap p-Type Semiconducting Spinel AB2O4 and Delafossite ABO2 Thin Films fng metal targets in an active gas atmosphere (Ar + O./N./CH., etc.) . In this chapter, we have discussed, in details, the formation of spinel and delafossite materials of the form AB.O. and ABO. (A and B may be monovalent, divalent, trivalent, or tetravalent cations, depending on the crystal st