遗产
发表于 2025-3-23 13:08:05
3 Fabrication of Oxide-Matrix Composites,in ceramics increases with density. As an exception, the fabrication of the porous-matrix composites and hybrid ceramic composites may usually require no fiber coating and no complicated consolidation step.
伙伴
发表于 2025-3-23 14:27:44
http://reply.papertrans.cn/71/7054/705336/705336_12.png
Optimum
发表于 2025-3-23 21:21:22
1 Introduction,ce should hold over several thousand hours, so that the composites exhibit minimized degradation in service. The requirement, concerning creep resistance was presently neglected. Instead, a moderately high mechanical strength and high toughness in the composites were given greater priority.
树上结蜜糖
发表于 2025-3-24 00:45:25
4 Tailoring and Control of Interphase,s, leading to fiber pull-out and consequently to damage tolerance of the composite. That means, by crack bridging, crack blunting and crack deflection mechanisms oxide CMCs tolerate fracture which otherwise, in monolithic ceramics, leads to catastrophic failure.
BADGE
发表于 2025-3-24 02:49:56
http://reply.papertrans.cn/71/7054/705336/705336_15.png
抛物线
发表于 2025-3-24 08:33:46
http://reply.papertrans.cn/71/7054/705336/705336_16.png
WAX
发表于 2025-3-24 13:52:06
http://image.papertrans.cn/o/image/705336.jpg
Hot-Flash
发表于 2025-3-24 18:18:44
http://reply.papertrans.cn/71/7054/705336/705336_18.png
Eosinophils
发表于 2025-3-24 19:29:54
5 Porous matrix composites,Synthesis of an effective fiber coating may require higher temperatures which partly degrade the fiber. Moreover, full-coverage of fiber surface with a coating layer which serves as an interphase in the composites may be costly and difficult to realize.
Flat-Feet
发表于 2025-3-24 23:53:58
http://reply.papertrans.cn/71/7054/705336/705336_20.png