LAVE
发表于 2025-3-28 17:41:52
Introduction,echanical, electrical, electronics, etc.), in concordance with the specificity of the controlled system. All these devices have in common the fact that their action on the system must take place without direct human supervision or intervention.
本土
发表于 2025-3-28 21:21:26
Functions Optimizationvariational calculus and in optimal control theory. Only the case of functions of real variables is considered here. Natural and exact sciences are based on functional relationships between different variables. If these functional relationships meet certain criteria, they can be studied by using pro
mechanism
发表于 2025-3-29 01:52:31
http://reply.papertrans.cn/71/7029/702820/702820_43.png
monochromatic
发表于 2025-3-29 03:16:57
Generalities Concerning the Optimal Control Problemson . shortly presents various ways of formulating optimal control problems and the main methods used to solve them. Some qualitative characteristics of these methods, accompanied by comparisons and criticisms, are included.
Senescent
发表于 2025-3-29 10:05:46
http://reply.papertrans.cn/71/7029/702820/702820_45.png
Formidable
发表于 2025-3-29 11:55:17
http://reply.papertrans.cn/71/7029/702820/702820_46.png
FLAX
发表于 2025-3-29 19:07:33
Dynamic Programming (Bellman Method)o complex optimal control problems. A brief introduction into dynamic programming is presented in this chapter.Dynamic programming is one of the most popular optimization methods. Its wide usage is explained by the fact that it can be used to solve a large diversity of problems, ranging from common
芦笋
发表于 2025-3-29 19:59:17
Heat Transfer Processesost work associated with the heating process are presented. The minimum entropy generation is generally not equivalent to the minimum lost available work. Two optimal control problems are defined and solved for various heat transfer mechanisms among which Newtonian heat convection and radiative heat
synchronous
发表于 2025-3-30 03:12:15
Heat Exchangersariations, can be used in case the optimization criterion is minimum entropy generation. The second procedure can be used in principle for any optimization criterion. Both procedures show that, whatever the optimization criterion, parallel flow heat exchangers can not be optimal but counter-flow dev
comely
发表于 2025-3-30 06:00:33
Storage of Thermal Energy and Exergyd here is the minimum exergy destruction. All relevant irreversibility sources are considered. Every operation regime has an optimum charging time, which increases by decreasing the hot gas inlet temperature. Also, there is an optimum gas mass flow rate that makes the exergy destruction number a . T