Injunction
发表于 2025-3-26 23:23:46
http://reply.papertrans.cn/71/7020/701910/701910_31.png
Pedagogy
发表于 2025-3-27 03:57:33
http://reply.papertrans.cn/71/7020/701910/701910_32.png
Ornament
发表于 2025-3-27 05:23:27
http://reply.papertrans.cn/71/7020/701910/701910_33.png
五行打油诗
发表于 2025-3-27 11:21:26
,Added Mass Partitioned Fluid–Structure Interaction Solver Based on a Robin Boundary Condition for Pd flow is described by the Navier–Stokes equations in the arbitrary Lagrangian–Eulerian form and the solid deformation is described by the St. Venant-Kirchhoff hyperelastic model in the total Lagrangian form. Both fluid and solid are discretised in space using the second-order accurate cell-centred
Interim
发表于 2025-3-27 17:10:57
CAD-Based Parameterization for Adjoint Optimization,ed to define the geometry of a model is often integral to the efficiency of the design. Even more crucial are the relations (constraints) between those parameters that do not allow the model to be under-defined. However, access to these parameters is lost when making the CAD model portable. Importin
glowing
发表于 2025-3-27 18:42:43
http://reply.papertrans.cn/71/7020/701910/701910_36.png
GULF
发表于 2025-3-28 00:06:11
CFD Analysis and Optimisation of Tidal Turbine Arrays Using OpenFOAM,uable resource to exploit. Tidal turbines that extract energy from tidal currents would be one way to do this. The shallow nature of estuaries suggests that these would need to be low power units linked together in large farms, and the modelling and optimisation of such farms of turbines is a signif
breadth
发表于 2025-3-28 02:35:20
,Combining an OpenFOAM,-Based Adjoint Solver with RBF Morphing for Shape Optimization Problems on th suite able to tackle shape optimization problems. The adjoint method provides a fast and accurate way for computing the sensitivity derivatives of the objective functions (here, drag and lift forces) with respect to the design variables. The latter control a group of RBF control points used to defo
花费
发表于 2025-3-28 10:14:10
Development of a Combined Euler-Euler Euler-Lagrange Slurry Model,. The reason for this is usually that dense slurries are too computationally expensive to model in the Euler-Lagrange frame. This presentation suggests a novel solution for reducing computational effort using OpenFOAM to combine two solvers. The two phases of the bulk flow are modelled, partially in
CHOP
发表于 2025-3-28 11:58:23
http://reply.papertrans.cn/71/7020/701910/701910_40.png