tenosynovitis
发表于 2025-3-23 12:08:44
Fault in Transmission Cables and Current Fault Location Methods conducted and the most important references are presented in the following chapter. Firstly, however, the mechanisms leading to faults in high voltage cables are briefly covered in order to examine which fault location methods are applicable.
不能平静
发表于 2025-3-23 17:57:06
Problem Formulation and Thesis Outlined systems. A thorough investigation into the behaviour of the crossbonded cable system under steady state and transient faulted conditions must be carried out. An important part of the work will be to verify the developed fault location method against field measurements of faults emulated on an installed crossbonded cable.
废止
发表于 2025-3-23 20:21:56
http://reply.papertrans.cn/71/7016/701548/701548_13.png
obsession
发表于 2025-3-24 01:13:13
Wave Propagation on Three Single-Core Solid-Bonded and Crossbonded Cable Systemsying a voltage impulse equal, but with opposite sign to that existing on the faulted phase at the time of fault. The study of how high frequency impulses propagate on a crossbonded system is therefore interesting for fault location purposes and is studied in this chapter.
明确
发表于 2025-3-24 05:46:31
Travelling Wave-Based Field Measurements for Verification of Fault Location Methods for Crossbonded tegy for a fault locator system for crossbonded cables. However, the cable models implemented in simulations programs today does not include all layers and materials used in real-life cables and several references are studying disagreements between simulation results and field data for instance [.].
Antigen
发表于 2025-3-24 07:30:12
http://reply.papertrans.cn/71/7016/701548/701548_16.png
破译密码
发表于 2025-3-24 12:33:51
Problem Formulation and Thesis Outlined systems. A thorough investigation into the behaviour of the crossbonded cable system under steady state and transient faulted conditions must be carried out. An important part of the work will be to verify the developed fault location method against field measurements of faults emulated on an inst
deface
发表于 2025-3-24 15:59:58
Impedance-Based Field Measurementsble models of today can be used to predict the fault loop impedance of various fault types is such a way that generic algorithms can be trained to estimate the fault location on crossbonded cables with good accuracy.
散布
发表于 2025-3-24 21:59:34
Wave Propagation on Three Single-Core Solid-Bonded and Crossbonded Cable Systemsying a voltage impulse equal, but with opposite sign to that existing on the faulted phase at the time of fault. The study of how high frequency impulses propagate on a crossbonded system is therefore interesting for fault location purposes and is studied in this chapter.
湿润
发表于 2025-3-25 01:16:58
The Use of the Single and Two-Terminal Fault Location Method on Crossbonded CablesThe instance the first fault wave arrives at the two fault locator terminals is the only variable that needs to be determined for accurate fault location if the wave velocity of the selected mode is known (see Eq. .). It is, however, still of interest to examine the use of the single-terminal fault