枯燥
发表于 2025-3-25 06:53:37
http://reply.papertrans.cn/67/6696/669517/669517_21.png
PHIL
发表于 2025-3-25 08:22:50
Wilhelm Granéliics by data-driven approaches. Spectral analysis shows that weld widths are apparently changed due to low-frequency variations of the welder’s hand movement, which can be filtered by a low-pass filter to remove the high-frequency components. The effect of welding torch orientation on weld pool dynam
arbovirus
发表于 2025-3-25 15:10:20
http://reply.papertrans.cn/67/6696/669517/669517_23.png
GUISE
发表于 2025-3-25 16:12:58
http://reply.papertrans.cn/67/6696/669517/669517_24.png
平躺
发表于 2025-3-25 23:49:03
http://reply.papertrans.cn/67/6696/669517/669517_25.png
AMPLE
发表于 2025-3-26 03:55:44
Stellan F. Hamrinnsile testing machine was used. The formation of the weld surface by different scanning methods was studied. The influence of cross section morphology and microhardness of welded joints and The Effect of microstructure on mechanical properties of the welded joint. The results showed that in working
NATAL
发表于 2025-3-26 07:39:47
Eva Bergman,Stellan F. Hamrin,Pia Romare judgment of welding quality monitoring. Arc sound signal is one of the associated signals of welding penetration state. It has been proved to be effective and essential information for weld quality control. In this paper, the author summarized all the recent research on welding arc sound in SJTU. F
隐语
发表于 2025-3-26 09:43:50
Eva Bergman,Eva Bergstrand judgment of welding quality monitoring. Arc sound signal is one of the associated signals of welding penetration state. It has been proved to be effective and essential information for weld quality control. In this paper, the author summarized all the recent research on welding arc sound in SJTU. F
同步左右
发表于 2025-3-26 15:47:42
http://reply.papertrans.cn/67/6696/669517/669517_29.png
愤慨点吧
发表于 2025-3-26 19:15:58
http://reply.papertrans.cn/67/6696/669517/669517_30.png