reception
发表于 2025-3-23 12:34:16
http://reply.papertrans.cn/67/6692/669135/669135_11.png
Laconic
发表于 2025-3-23 16:04:41
paths are established by numerical modeling method; finally, the constitutive equations are embedded in the finite element program and verified by comparing the finite element calculation results of the triaxial test soil samples with the corresponding test results. The modeling obtains high accuracy..978-981-16-3233-4978-981-16-3231-0
怪物
发表于 2025-3-23 21:23:48
http://reply.papertrans.cn/67/6692/669135/669135_13.png
llibretto
发表于 2025-3-24 01:28:46
http://reply.papertrans.cn/67/6692/669135/669135_14.png
Control-Group
发表于 2025-3-24 04:13:58
Introduction, pure mechanical properties are Hooke’s law, Newton’s law of internal friction, Saint Venant’s law of ideal plasticity, etc., and those reflecting thermodynamic properties are Clapeyron’s equation of state of ideal gas, Fourier’s equation of heat conduction, etc.
大厅
发表于 2025-3-24 06:51:03
http://reply.papertrans.cn/67/6692/669135/669135_16.png
重叠
发表于 2025-3-24 14:26:05
Numerical Modeling Methods,tic, plastic, elastoplastic, or other theoretical forms, these are all regarded as empirical. Although it is solvable in some practical engineering situations, it is difficult to obtain analytical solutions due to the many complexities in the natural state of geological bodies. For inhomogeneous med
circuit
发表于 2025-3-24 15:02:11
http://reply.papertrans.cn/67/6692/669135/669135_18.png
旧石器
发表于 2025-3-24 21:25:31
http://reply.papertrans.cn/67/6692/669135/669135_19.png
艺术
发表于 2025-3-25 02:49:11
Influence of Stress Path and Stress History on the Constitutive Relation,e not very clear. This chapter is based on the principle of interaction between plastic volumetric strain and plastic shear strain. Based on the triaxial compression tests of remolded clay under different stress paths and stress histories, the influence mechanism of stress history and stress path on