ADORE
发表于 2025-3-23 12:01:26
Developing 3D Welding Process with SIEMENS NX and KUKA Robot Manipulatora robotic system using Siemens NX. The system converts a CAD model into G-code and translates it to KUKA Robotic Language (KRL).This results in a complex welding trajectory useful for high quality prototype products or additional welding on semi-finished products.
BILL
发表于 2025-3-23 17:14:50
A Contribution to Theoretical-Experimental Research of Transverse Vibrations of the Axle Spindle Levr the two variable frequency analysis, the 2D Fourier transform was used. The illustration of the procedure’s applicability was performed on its idealized model, and the conducted research showed that the two-parameter frequency analysis can also be used in generating transverse vibrations in laboratory conditions.
净礼
发表于 2025-3-23 19:45:26
http://reply.papertrans.cn/67/6659/665833/665833_13.png
翻动
发表于 2025-3-24 00:25:35
http://reply.papertrans.cn/67/6659/665833/665833_14.png
掺假
发表于 2025-3-24 06:05:51
Deviation Analysis of Upper Leg Angle Measurements: Insights into Inertial Sensor Placement Strategiompared with previously obtained results. The improved measurement method resulted in angles whose average RMS was reduced by almost 78%.The values of RMS of improved method are 1.3° for hip flexion and extension and 0.57° for hip adduction and abduction, which brings inertial sensors to the level o
DEAWL
发表于 2025-3-24 10:20:06
Analysis of the Calibration of Different Types of Incubators and Their Calibration Deviationsf the calibration results. All the mentioned equipment should be regularly calibrated, in order to be sure of the validity of the obtained results. The mentioned equipment/standards must be calibrated and traceable according to a standard of a higher level of metrology ability.
戏法
发表于 2025-3-24 13:15:37
Investigation of Conditions of Directed Thermal Influence on Changes of Physical and Mechanical Propat are under the influence of high-temperature heating through cracks and pores came to the surface of the faces of the crystals. The analysis of the obtained data indicates that for synthetic diamond grains made in both systems, the effect of increasing the strength of grains under the action of th
裤子
发表于 2025-3-24 15:27:43
http://reply.papertrans.cn/67/6659/665833/665833_18.png
宠爱
发表于 2025-3-24 19:14:44
Conference proceedings 2024Application VII is oriented toward Fourth Industrial Revolution “Industry 4.0”, which implementation will improve many aspects of human life in all segments and lead to changes in business paradigms and production models. Further, new business methods are emerging, transforming production systems, t
名次后缀
发表于 2025-3-25 02:27:20
sind mit zahlreichen Beispielen vertreten. Breiter als bisher werden stabilitätsgefährdete, selbsterregungsfähige Systeme beschrieben. Das Buch eignet sich sowohl als Lehrbuch für Hoch- und Fachhochschulen als auch zum Selbststudium für Ingenieure in Forschungseinrichtungen und in der Industrie..978-3-540-88977-9