同音 发表于 2025-3-25 06:47:24
A. Fezer,M. Klokerinutility of the nearly ninety years of scholarship that have been devoted to that highly scholarunfriendly subject, the causes of war. Just about everything that has been written on the subject with a view to developing a general theory of the causes of war has been a thorough waste of effort. Theanalogous 发表于 2025-3-25 10:22:54
http://reply.papertrans.cn/67/6658/665725/665725_22.png谷物 发表于 2025-3-25 13:16:47
O. Brodersen,E. Monsen,A. Ronzheimer,R. Rudnik,C.-C. Rossow防止 发表于 2025-3-25 16:26:44
http://reply.papertrans.cn/67/6658/665725/665725_24.png爱得痛了 发表于 2025-3-25 22:58:22
On Active Control of Boundary Layer Instabilities on a Wing,ling-wave is successfully used for attenuation of natural occurring TS-waves on a wing. The actuator is driven by a digital signal processor, executing an adaptive filter algorithm to perform feedforward control of the wave cancellation process. A high attenuation of TS-waves is obtained not only indowagers-hump 发表于 2025-3-26 03:52:39
Computation of Aerodynamic Coefficients for the DLR-F6 Configuration using MEGAFLOW,ion to the Baldwin-Lomax model, first computations using the . turbulence model from Wilcox are presented. The pressure distributions as well as the lift and drag coefficients are compared to wind tunnel measurements for both configurations. The comparison shows a good quality of the numerical resul眼界 发表于 2025-3-26 06:18:59
http://reply.papertrans.cn/67/6658/665725/665725_27.pngEncoding 发表于 2025-3-26 12:23:57
H. Bieler,R. Aleweltositive-negative project balances; risk techniques of sensitivity analysis, optimistic-pessimistic analysis, discrete probability examples, and continuous proba978-3-031-79393-6978-3-031-79394-3Series ISSN 2690-0300 Series E-ISSN 2690-0327AGONY 发表于 2025-3-26 14:41:52
http://reply.papertrans.cn/67/6658/665725/665725_29.png食料 发表于 2025-3-26 20:15:30
Impact of Stringer-Width on the Effect of Hybrid Laminar Flow with Suction,with increased stringer width, suction chamber failure and outflow from a suction chamber..It comes out that within limits concessions to the ease of manufacturing or to other systems for a commercial application might be balanced with higher suction rates and therefore higher power requirements for the HLF system.