Abutment
发表于 2025-3-25 05:46:46
http://reply.papertrans.cn/67/6611/661032/661032_21.png
混合
发表于 2025-3-25 11:01:39
http://reply.papertrans.cn/67/6611/661032/661032_22.png
厌食症
发表于 2025-3-25 11:40:15
http://reply.papertrans.cn/67/6611/661032/661032_23.png
BLAZE
发表于 2025-3-25 16:20:57
Effect of Low-Molecular Weight Arenes Additives on the Interphase Layer Structure of SAN-PS Systems on styrene-acrylonitrile (SAN)-polystyrene (PS) copolymers studied. Benzene found to selectively interact with SAN and PS, blocking the polymer–polymer interaction in interphase layer (IPL). The restructuring of the IPL structure in the presence of toluene revealed, as well as the increase in the st
阶层
发表于 2025-3-25 20:01:07
Electrostatics of a Nanowire Radial Heterostructure , Diodehe depletion approximation. The cases of the symmetric structure (when the doped layers are made of the same material) and the asymmetric one (when the doped layers are made of different materials) are considered. It is shown that in advance-given profile of the built-in electric field can be achiev
有权
发表于 2025-3-26 01:28:08
Vapor-Condensed Composite Materials Ni–Al2O3, NiCr–Al2O3 with Oxide Nanophase It was shown that nanoparticles are uniformly distributed throughout the volume of the condensates. The factor affecting the structure is the contact interaction at the particle–matrix interphase boundary. The studied mechanical properties at temperatures of 700 and 1000 ± 20 °C show that small con
帐单
发表于 2025-3-26 07:56:09
Transmission of the Ultrarelativistic Quasi-particles in the Nanostructure with the Step-Like Barriehe step-like barrier has a rectangular shape and is created by the external electrostatic potential. The Klein tunneling can also be manifested in this structure. For many parameter values, the Klein tunneling can be suppressed. For certain values of the parameters, there may be a wide plateau of in
责怪
发表于 2025-3-26 10:31:33
Study of the Effects of MgO Additive and Sintering Temperature on Mechanical Behavior of Fine-Grainehavior of the ceramics depending on the sintering temperature and percentage of MgO additive. Conventional sintering of series of ceramic specimens in a temperature range of 1510–1850 °C with and without annealing was performed. A set of mechanical tests were carried out: (i) strength test of beam s
antiquated
发表于 2025-3-26 14:07:39
978-3-031-42706-0The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerl
Forage饲料
发表于 2025-3-26 20:22:57
Nanostructured Surfaces, Nanocomposites and Nanomaterials, and Their Applications978-3-031-42704-6Series ISSN 0930-8989 Series E-ISSN 1867-4941