不爱防注射
发表于 2025-3-23 13:38:11
General Conclusions and Outlook,egligible plasticity. The ideal density for optimal mechanical properties was determined to be ~ 25.0 %, which is within the local failure deformation regime. Enhancement in mechanical properties in MG cellular structures was achieved by stress optimization through corner-fillets, which doubled the
BANAL
发表于 2025-3-23 15:19:48
Book 2015re configuration within the matrix, and the overall width of the sample determines the extent of deformation, where the optimized values are attained for pore diameter to spacing ratio of one with AB type pore stacking.
Exclaim
发表于 2025-3-23 20:28:29
Microstructure-Property Optimization in Metallic Glasses
尽责
发表于 2025-3-24 01:33:08
2190-5053 ent of deformation, where the optimized values are attained for pore diameter to spacing ratio of one with AB type pore stacking.978-3-319-36538-1978-3-319-13033-0Series ISSN 2190-5053 Series E-ISSN 2190-5061
Crohns-disease
发表于 2025-3-24 05:26:40
http://reply.papertrans.cn/64/6336/633519/633519_15.png
固执点好
发表于 2025-3-24 07:45:27
http://reply.papertrans.cn/64/6336/633519/633519_16.png
忍受
发表于 2025-3-24 14:05:54
2190-5053 g a novel quantitative approach by which influence of the seThis thesis consists of an in-depth study of investigating microstructure-property relationships in bulk metallic glasses using a novel quantitative approach by which influence of the second phase features on mechanical properties can be in
Proponent
发表于 2025-3-24 18:08:33
http://reply.papertrans.cn/64/6336/633519/633519_18.png
Alienated
发表于 2025-3-24 22:20:00
http://reply.papertrans.cn/64/6336/633519/633519_19.png
Inveterate
发表于 2025-3-24 23:15:31
Structural Characterization of Metallic Glasses, cast material for the artificial microstructures. For this reason, three different test methods, namely, formability test, structural and thermal analysis, and bending test were conducted prior to fabrication and testing of MG heterostructures, and the results are presented in this chapter.