商业上
发表于 2025-3-28 17:30:14
http://reply.papertrans.cn/64/6333/633258/633258_41.png
FOLD
发表于 2025-3-28 19:31:50
Victor M. Ugaz,Jennifer L. Christensenined positive) paralleling the axis of the lagoon. For NNWly winds of +2.4 m/s, a northward residual flow first appears in model layer 1. Winds of approximately +2.5 m/s and -2.5 m/s negate and double, respectively, the mass transport residual current calculated for calm conditions. Wind data from t
浮夸
发表于 2025-3-29 01:47:00
Ómar Gústafsson,Jörg P. Kutterined positive) paralleling the axis of the lagoon. For NNWly winds of +2.4 m/s, a northward residual flow first appears in model layer 1. Winds of approximately +2.5 m/s and -2.5 m/s negate and double, respectively, the mass transport residual current calculated for calm conditions. Wind data from t
娘娘腔
发表于 2025-3-29 06:49:20
Götz Münchow,Klaus-Stefan Dreseven though it may not have suffered deformation. It is also possible to have residual stresses when a multi-phase body, where the phases have different yield points, is pulled in uniaxial tension. The macrostress field in the deformed material will be negligible since the material will have the same
大洪水
发表于 2025-3-29 10:59:50
Petra S. Dittrich,Fedor Malik,Petra Schwille occurs only within each such region, and the peak (from such a region) is larger in angular extent the smaller is such a region. This is so because when the region is small there are not as many planes to cause destructive interference away from the exact Bragg angle. To see this more clearly we ad
横截,横断
发表于 2025-3-29 12:43:54
http://reply.papertrans.cn/64/6333/633258/633258_46.png
纪念
发表于 2025-3-29 19:34:05
https://doi.org/10.1007/978-0-387-68424-6Analysis; Microfluidic; Miniaturized; Schoenfeld; Schonfeld; Schönfeld; Stent; Systems; Technologies; integra
BUOY
发表于 2025-3-29 22:03:53
http://reply.papertrans.cn/64/6333/633258/633258_48.png
Assignment
发表于 2025-3-30 03:10:26
http://reply.papertrans.cn/64/6333/633258/633258_49.png
低三下四之人
发表于 2025-3-30 06:33:18
Steffen Hardt,Friedhelm SchönfeldComprehensive listing of the most promising microfluidic technologies in the Lab-on-a-Chip field.Technologies that are explained in detail can be viewed as toolboxes needed to set up complex Lab-on-a-