热心
发表于 2025-3-30 08:55:05
Theoretical Foundation of the MMM Techniqueating the repair quality of remanufactured products. However, the research to date on the MMM technique has mainly involved the characteristic extraction of magnetic signals or investigation of their variation trend. This series of studies cannot help us to clarify the generation mechanism of sponta
芦笋
发表于 2025-3-30 13:32:12
http://reply.papertrans.cn/64/6315/631433/631433_52.png
肌肉
发表于 2025-3-30 18:35:44
Stress Induces MMM Signals stress can be induced in these components by the applied tensile, compressive and bending loads. In addition, the stress level increases with the increase in loads or fatigue cycles. When the stress exceeds a certain level, the crack will initiate and propagate at the stress concentration zone, whi
LATER
发表于 2025-3-30 21:15:02
http://reply.papertrans.cn/64/6315/631433/631433_54.png
FUME
发表于 2025-3-31 01:25:51
http://reply.papertrans.cn/64/6315/631433/631433_55.png
不能逃避
发表于 2025-3-31 07:11:41
Applied Magnetic Field Strengthens MMM Signalst physical mechanism of the (MMM) signal has been studied, and various theories and models have been proposed. Some have found that the .(.) signals are distributed randomly for different materials, especially in the elastic deformation stage, while others have found that the .(.) curves have regula
钩针织物
发表于 2025-3-31 13:05:56
Characterization of Heat Residual Stress During Repairhe damage zones of the cores if they have remanufacturing value. As a typical remanufacturing repair technique, plasma transferred arc welding (PTAW) is commonly employed to prepare a cladding coating on a metallic substrate, which exhibits special advantages including a low dilution rate, intensive