erythema
发表于 2025-3-25 06:54:09
http://reply.papertrans.cn/63/6289/628842/628842_21.png
TOXIN
发表于 2025-3-25 09:49:25
Application of the Keyhole TIG Process for High Productivity Welding of Superduplex Stainless Steelx stainless steel without bevelling the edges and without adding a filler metal. The TIG method combines a number of advantages, but the disadvantage is certainly the long and manual welding process. Despite the undisputed high quality of the welded joints, this method is associated with low product
bibliophile
发表于 2025-3-25 13:47:15
Modeling of Thermal Stresses in Technological Equipment of Heat Treatment Furnaces,rs such as high and rapidly changing temperature, which significantly contribute to their destruction. The article presents examples of damage observed in cast pallets, which are part of furnace equipment, on which heat-treated elements are placed during their treatment. The developed methodology of
Finasteride
发表于 2025-3-25 16:45:42
Functional Assessment of Projection Screen Materials for Thermal Detection in Virtual Shooting Traig for correct identification of the location of hit and adequate representation of projected content. An additional requirement is ensuring the safety of personnel and equipment by reducing kinematic energy of projectiles travelling up-range after bouncing of the screen while maintaining sufficient
progestogen
发表于 2025-3-25 22:31:50
http://reply.papertrans.cn/63/6289/628842/628842_25.png
LVAD360
发表于 2025-3-26 02:53:16
Finite Element Modelling of Thin-Walled Box Beams Partially Filled with Polymer Concrete,o time-varying loads. Therefore, it is desirable to shape their dynamic properties. It can be achieved by filling these components with polymer concrete. The polymer concrete filling increases stiffness and damping of the steel structure. However, it also causes a significant increase in its weight.
OVER
发表于 2025-3-26 05:51:57
http://reply.papertrans.cn/63/6289/628842/628842_27.png
里程碑
发表于 2025-3-26 09:34:32
Effect of Thermal Cycles on the Microstructure and Mechanical Properties of the Heat Affected Zone and structures under various operating and manufacturing conditions. According to the Industry 4.0 concept, smart devices prompt the user how to produce the given element, with what parameters. On the other hand, the performance of a welded joint involves, inter alia, the use of adequate technology,
GUILE
发表于 2025-3-26 16:15:55
http://reply.papertrans.cn/63/6289/628842/628842_29.png
Euphonious
发表于 2025-3-26 18:21:53
Geometric Model of Ball-End Micro Milling,ding the tool path, uncut surface roughness, static and dynamic tool deflection. This work is an attempt to model ball-end groove micro machining. The thickness of the cutting layer at any time can be determined. Geometric structure of the surface after machining can be formed with the influence of