Obsessed
发表于 2025-3-26 23:39:01
http://reply.papertrans.cn/63/6286/628504/628504_31.png
乞讨
发表于 2025-3-27 03:03:36
Optical Interference for Deformation Measurements--Classical, Holographic and Moiré Interferometryngineering measurements; and to explain them in sufficient detail to generate a comfortable association with the subject. Ultimately, the mission is to foster understanding and appreciation in order to inspire increased utilization and further development.
CT-angiography
发表于 2025-3-27 06:37:07
Anisotropic Elastic Constants of a Fiber-Reinforced Boron-Aluminum Compositendomly distributed fibers, a full set of elastic constants can be predicted for this model. The random-distribution model agrees best with observation, especially for off-diagonal elastic constants. Considering all nine elastic constants, observation and theory differ on the average by six percent.
arabesque
发表于 2025-3-27 10:45:51
http://reply.papertrans.cn/63/6286/628504/628504_34.png
octogenarian
发表于 2025-3-27 15:59:47
http://reply.papertrans.cn/63/6286/628504/628504_35.png
和音
发表于 2025-3-27 18:01:13
Evaluation of Sensitivity of Ultrasonic Detection of Delaminations in Graphite/Epoxy Laminates. Pulse echo and through transmission modes were used and A-scans, C-scans and frequency spectra were analyzed. It was found that the higher frequency (5MHz) compression transducer operated in the pulse-echo mode gave the best results in most cases. Shear wave transducers were found to be cumbersome to use and unsuitable for the cases studied.
滑稽
发表于 2025-3-28 00:42:51
http://reply.papertrans.cn/63/6286/628504/628504_37.png
Condense
发表于 2025-3-28 02:59:40
Influence of Initial Defect Distribution on the Life of the Cold Leg Piping Systemificance of parameters like defect size and shape to damage tolerant approaches discussed, in terms of piping system life. Results of the paper are interpreted in light of relevant NDI capabilities and requirements.
淘气
发表于 2025-3-28 08:42:27
Optical Interference for Deformation Measurements--Classical, Holographic and Moiré Interferometry-wavelength sensitivity range. This article is a tutorial treatment of the subject. Its purpose is to introduce modern interferometric techniques of engineering measurements; and to explain them in sufficient detail to generate a comfortable association with the subject. Ultimately, the mission is t
Cholecystokinin
发表于 2025-3-28 14:14:50
Basic Wave Analysis of Acoustic Emissiontructural alteration in a solid material. Generally these structural alterations are a result of either internally or externally applied mechanical or thermal stress. Depending on the source mechanism, acoustic emission signals may occur with frequencies ranging from several hertz up to tens of mega