最有利
发表于 2025-3-23 12:25:43
http://reply.papertrans.cn/63/6285/628456/628456_11.png
上下倒置
发表于 2025-3-23 14:25:36
Autonomous Healing and Indication of Transverse Crack Damage in Carbon Fiber Composite Laminates,ribution of thermoplastic-rich regions into the damage volume. Evaporation of the solvent leaves solid thermoplastic in place of the crack and allowing AIE luminogens to aggregate and fluoresce. Using a small load frame that mounts under an optical microscope, we measure full-field surface strains d
甜瓜
发表于 2025-3-23 19:24:28
A Novel Test Geometry for Characterization of Traction-Separation Behavior in Composite Laminates Uesting needed for crash analysis..In this study, a novel Mode I test specimen adapted from a recent advancement in structural adhesive characterization is applied to evaluate composite delamination. The hybrid Rigid Double Cantilever Beam (RDCB) test specimen presented herein consists of rigid steel
钉牢
发表于 2025-3-23 23:38:20
,Design of Recycled Alumix-123 Based Composites Reinforced with γ-Al2O3 through Combined Method; Sinoulding and pre-sintering and finally forging. In the final stage, material parameters were optimized for improving physical and mechanical properties of these composites. Further, the influence of reinforcement’s type and content on the mechanical properties has also been reviewed and discussed. Da
轻率看法
发表于 2025-3-24 06:22:26
Tailored Behaviour of Scrap Copper Matrix Composites Reinforced with Zinc and Aluminium: Low Cost Sre produced with addition of small amount of fine particles as secondary reinforcements. These composites will be used for the applications of the coupling and actuators in the aeronautical area. For mechanical basically for the tailored behaviour of this composite, three point bending (3 PB) and im
合群
发表于 2025-3-24 07:11:17
New Design of Composites from Fresh Scraps of Niobium for Tribological Applications,trial applications..The present work review of the efficient and sustainable recycling of the fresh scraps of niobium metal in the frame of the common research project carried out between UNICAMP-Brazil and SUPMECA-France. In this work, aluminium (AA 7075) matrix composites were designed by using th
Fecal-Impaction
发表于 2025-3-24 13:57:14
,Manufacturing of “Ni-Ti” Based Composites from Fresh Scrap Thin Sheets Reinforced with Nb and TiB2 the time. With the finite element model developed with reference to these tests, the mechanical behaviour of the material is supported by simulations made with the Abaqus software. Finally, more detailed mechanical/physical properties of this developed material were investigated by applying wear and
愉快么
发表于 2025-3-24 17:28:50
http://reply.papertrans.cn/63/6285/628456/628456_18.png
Ibd810
发表于 2025-3-24 22:07:24
Enhanced Structural Imperfection Resistance in Thin-Walled Tubes Filled with Liquid Nanofoam, imperfection resistance is attributed to the suppression of imperfection growth caused by the strong liquid-solid interaction between the LN and tube wall. These findings suggest that the LN filling material can effectively reduce the adverse impact of structural imperfection and shed light on futu
窒息
发表于 2025-3-25 01:57:48
Time Temperature Superposition Shift Factors for Fabric Composites,for a fabric composite and geometrical limitations in the thickness of a ply, a higher force method would be more useful. In this study, an electrodynamic test frame was used to determine the shift factors for a glass fiber reinforced polymer (GFRP) composite which has a thermoset matrix. The goal i