系列
发表于 2025-3-27 01:01:17
http://reply.papertrans.cn/63/6284/628302/628302_31.png
GULLY
发表于 2025-3-27 04:37:13
Strength Analysis of a Plate Heat Exchanger with Two Design-By-Analysis Methods,n with the traditional method or so-called design-by-rules. In this paper, two design-by-analysis methods, namely Elastic Stress Analysis Method and Limit-load Analysis Method were used to perform stress assessment of a plate heat exchanger. Results show that the plate heat exchanger meets the stren
Conflict
发表于 2025-3-27 06:03:44
http://reply.papertrans.cn/63/6284/628302/628302_33.png
轻触
发表于 2025-3-27 11:41:20
http://reply.papertrans.cn/63/6284/628302/628302_34.png
官僚统治
发表于 2025-3-27 14:19:24
Simulation of Multi-step Tube Hot Gas Forming Process of a UHSS Torsion Beam,y, a novel process simulation of multi-step tube hot metal gas forming (HMGF) of a V-shape torsion beam is conducted. The aim of this paper is to provide the insight into the influence of process variables, such as pre-heating condition, gas pressure and tool temperature, on the formability, hardeni
Dictation
发表于 2025-3-27 20:41:54
Modeling and Parameter Identification for Active Lubricated Hydrostatic Bearing-Rotor System,ice life. Models from first principles are often complex and inaccurate caused by the discrepancy between the ideal hypothesis and the actual situation. And the multiple-input multiple-output (MIMO) characteristics of the system further increase the complexity of modeling, but the system requires lo
fructose
发表于 2025-3-27 23:53:10
The Influence of Pressure Angle of Spur Gears on Bending Stress Considering the Effect of Root Filloth breakage will end the gear life, so gear bending stress has to be accurately calculated for reliable operation. Many efforts have been made to increase gear bending strength including improving gear material property. With increasing demand for high power density gear applications, the need to o
乱砍
发表于 2025-3-28 06:03:15
http://reply.papertrans.cn/63/6284/628302/628302_38.png
流浪者
发表于 2025-3-28 07:36:16
Electro-Mechanical Co-Simulation of a 6-DOF Parallel Robot, the defects caused by the vertical direction layer by layer accumulation additive manufacturing mode, and the 3D printing equipment with 6-DOF parallel robot can print 3D entities with complex shape and smooth surface without support. In order to increase the design efficiency and verify the correc
Scintigraphy
发表于 2025-3-28 12:12:05
http://reply.papertrans.cn/63/6284/628302/628302_40.png