Malcontent
发表于 2025-3-26 23:15:12
http://reply.papertrans.cn/63/6283/628298/628298_31.png
FILTH
发表于 2025-3-27 01:56:35
http://reply.papertrans.cn/63/6283/628298/628298_32.png
消瘦
发表于 2025-3-27 06:42:58
Thermal Problems of Weldingchanical model of underwater welding is proposed assuming rate dependent material reaction, full coupling of thermal and mechanical effects, latent heat accompaning the solid-liquid phase change and environmental water boiling effects. An incremental variational formulation of boundary value problem
Nomadic
发表于 2025-3-27 11:57:59
http://reply.papertrans.cn/63/6283/628298/628298_34.png
pacific
发表于 2025-3-27 14:13:52
Temperature Fields and Stress States in Welded Tubes of Rectangular Cross Sectionelting of electrode rod away and melting of parent material and then solidification of molten pool are considered. The calculated temperature courses at characteristic points in welded tubes of rectangular cross-section are presented. On the basis of calculated temperature field the uniaxial state o
不成比例
发表于 2025-3-27 20:00:05
http://reply.papertrans.cn/63/6283/628298/628298_36.png
小争吵
发表于 2025-3-28 00:24:28
Measurement of Residual Stress Distributions Near the Toe of a Weld Between a Bracket and a Plate Uschanics. In the present paper the method is extended to the measurement of residual stresses either at the toe of a weld joining a bracket to a plate or at the toe of a fillet weld which joins two plates. Results are presented for a specimen which simulates the attachment of a bracket to the wall of
咯咯笑
发表于 2025-3-28 02:12:35
Effect of Weld Metal Mis-match on Toughness Requirements: Some Simple Analytical Considerations Usinor applied strain for work-hardening materials. Its application to a transverse welded wide plate shows that differences in the plastic properties of the weld metal and base material, respectively, significantly affect the CTOD. The expressions derived can serve for stating toughness requirements of
instate
发表于 2025-3-28 09:25:46
Compressive Strenght of Structural Members with Undermatching Weld Joints tensile strength and fracture toughness have been studied. However, its strength under compressive load is not thoroughly understood yet because it involves buckling phenomena. To clarify the compressive strength of structural members with undermatching weld joints, the authors analyz
艺术
发表于 2025-3-28 12:19:24
http://reply.papertrans.cn/63/6283/628298/628298_40.png