hermitage
发表于 2025-3-26 22:57:49
Torsion in Shafts stress in a shaft under the action of a torque. Mathematical expressions have been derived for the shear stress, shear strain, and the angle of twist. Additionally, an expression for shaft diameter in terms of the torque and shear stress has been derived. In industrial practice, an electric motor i
poliosis
发表于 2025-3-27 05:01:06
Failures Theories and Designlure. The commonly applied theories of failure are explained; these theories include: the maximum principal normal stress theory (or .), the maximum shear stress theory (or .), and von Mises theory. In particular, Tresca theory and von-Mises theories are discussed with reference to their application
outskirts
发表于 2025-3-27 06:10:56
Fracture Mechanics and Designnd their causes leading to the evolution of . field. Griffith crack theory has been stated and the relevant mathematical relationship has been derived. The stress concentration factor (.) has been explained with the aid of mathematical models and the real-life example of aircrafts’ cabin windows wit
侧面左右
发表于 2025-3-27 11:36:19
Fatigue Behavior of Materialshree stages. Alternating, repeating, and fluctuating stress cycles have been qualitatively and quantitatively discussed giving real-life examples. Fatigue strength, fatigue life, and endurance limit/fatigue limit has been explained with reference to S-N curves for steel and an aluminum alloy. Goodma
奇怪
发表于 2025-3-27 16:55:19
http://reply.papertrans.cn/63/6283/628278/628278_35.png
否认
发表于 2025-3-27 21:38:53
Mechanical Behavior of Composite Materialsaterials is first presented followed by a discussion on the various types of composites with particular reference to fibrous composites. The physical and mechanical properties of carbon fiber reinforced polymer (CFRP) composites are tabulated with emphasis on their applications in aerospace industry
最有利
发表于 2025-3-27 23:11:52
Introductionure, ductile and brittle fractures, DBT failure, fatigue, materials selection in design, and the factor of safety (FoS) in design. This chapter incudes 6 diagrams, and 2 calculations/worked examples, and 10 MCQs with answers.
In-Situ
发表于 2025-3-28 05:35:51
http://reply.papertrans.cn/63/6283/628278/628278_38.png
calumniate
发表于 2025-3-28 08:25:40
Strengthening Mechanisms in Metals/Alloystion strengthening, and dispersion strengthening. This chapter contains 11 diagrams and 10 worked examples/solved problems, 7 exercise problems, 7 mathematical formulae, and 5 MCQs with their answers at the end of the book.
Deject
发表于 2025-3-28 14:24:37
Stress-Strain Relations and Deformation Modelsarious deformation models indicating yield criteria are presented along with the examples from industrial practice. This chapter contains 3 diagrams, 13 mathematical models, 8 worked examples (solved problems) and 5 MCQs, with their answers given at the end of the book.