aerial
发表于 2025-3-27 00:39:07
http://reply.papertrans.cn/63/6259/625860/625860_31.png
外观
发表于 2025-3-27 03:38:23
http://reply.papertrans.cn/63/6259/625860/625860_32.png
achlorhydria
发表于 2025-3-27 07:32:34
Effect of the Hardness in Al/TiB2 MMC with Sand Mould and Permanent Mouldo be made using the vortex process. These features make Al/TiB. MMCs very desirable. Typically, experimental techniques are employed to characterize as-cast Aluminium (356), Al/TiB. MMCs. The goal of this research is to determine the effectiveness of various moulds, such as sand moulds and permanent
Albinism
发表于 2025-3-27 11:02:27
Studies of Effects of Pollutants M Sand, Wood Ash, Rice Husk Ash and Graphene on Mechanical Propertiminium alloy and affect its inherent characteristics. As the recycled scraps shown to have more contaminants, known pollutants like carbon, ash, graphene powder and sand were introduced in a control percentage to the recycled aluminium. The samples were fabricated with a common 4wt% addition of the
Omnipotent
发表于 2025-3-27 14:00:48
Comparisonal Analysis of “V” Punches with Various Radii and Its Impact on the Steel Material Used fothe most common reasons for uneven sheet metal parts during the bending process. The experimental investigation was conducted on a thick plate made of EN-3B Steel material with a thickness of 8 mm. A striking issue in sheet metal forming operation in both theory and engineering has been the bending
飞镖
发表于 2025-3-27 19:07:47
http://reply.papertrans.cn/63/6259/625860/625860_36.png
神圣在玷污
发表于 2025-3-27 23:51:49
Comparative Study of Mechanical Strength and Piezoelectric Coefficient of Post-processed Polyvinylidost-processed as annealed and mechanically stretched for enhancing its mechanical strength and piezoelectric coefficient to utilize for the different piezoelectric applications. The FESEM images are shown beadles and randomly oriented nanofibers. After post-processing, the mechanical strength and el
eucalyptus
发表于 2025-3-28 02:40:23
http://reply.papertrans.cn/63/6259/625860/625860_38.png
改正
发表于 2025-3-28 10:01:02
Investigation on Pull-Out Strength and Stripping Torque of Joint Produced by Ultrasonic Insertion anmoplastic test specimen, which need to be joined, are prepared as per standards. Ultrasonic insertion process is optimized through response surface methodology (RSM). The experiments are conducted, and joints are produced for optimum inserting conditions. Similarly, the metal insert and thermoplasti
neutral-posture
发表于 2025-3-28 11:35:39
Investigation on Machinability of EN8 Steel Through Taguchi Method, ANOVA and Genetic Algorithm experiments are planned and conducted as per L27 orthogonal array and polynomial models for surface roughness and circularity error of EN8 steel shaft are developed. Reliability of polynomial models and significance of turning parameters are tested using ANOVA. The polynomial models are integrated