McKinley
发表于 2025-3-21 18:13:22
书目名称Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang影响因子(影响力)<br> http://figure.impactfactor.cn/if/?ISSN=BK0625773<br><br> <br><br>书目名称Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang影响因子(影响力)学科排名<br> http://figure.impactfactor.cn/ifr/?ISSN=BK0625773<br><br> <br><br>书目名称Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang网络公开度<br> http://figure.impactfactor.cn/at/?ISSN=BK0625773<br><br> <br><br>书目名称Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang网络公开度学科排名<br> http://figure.impactfactor.cn/atr/?ISSN=BK0625773<br><br> <br><br>书目名称Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang被引频次<br> http://figure.impactfactor.cn/tc/?ISSN=BK0625773<br><br> <br><br>书目名称Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang被引频次学科排名<br> http://figure.impactfactor.cn/tcr/?ISSN=BK0625773<br><br> <br><br>书目名称Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang年度引用<br> http://figure.impactfactor.cn/ii/?ISSN=BK0625773<br><br> <br><br>书目名称Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang年度引用学科排名<br> http://figure.impactfactor.cn/iir/?ISSN=BK0625773<br><br> <br><br>书目名称Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang读者反馈<br> http://figure.impactfactor.cn/5y/?ISSN=BK0625773<br><br> <br><br>书目名称Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang读者反馈学科排名<br> http://figure.impactfactor.cn/5yr/?ISSN=BK0625773<br><br> <br><br>
Eructation
发表于 2025-3-21 21:13:19
Concurrent Production of Iron and Syngas from Iron Ore and Coal Mixturesource for the carbon partial reaction to form CO. In comparison with conventional coal gasification, the oxygen comes from iron oxide instead of pure oxygen separated from the air. This study showed that direct reduced iron with over 95% metallization and syngas with total concentration of CO and combustibles over 80% were readily produced.
Collar
发表于 2025-3-22 03:22:12
2367-1181 ls for value-added applications.• Principles and interactions of material characterization and manufacturing processing.978-3-030-65243-2978-3-030-65241-8Series ISSN 2367-1181 Series E-ISSN 2367-1696
因无茶而冷淡
发表于 2025-3-22 05:39:32
http://reply.papertrans.cn/63/6258/625773/625773_4.png
Cerebrovascular
发表于 2025-3-22 10:25:38
Control of Copper Loss in Flash Smelting Slagparameters including slag composition, matte grade, and temperature have been proposed for the flash smelting furnace operations to minimize the copper content in the slag. The experimental results are also compared with the FactSage calculations.
Deceit
发表于 2025-3-22 13:59:11
Metallographic Feature of a Nickel-Based Superalloy in Fluoride Electrolyte Melt. The diffusion speeds of the metals are in a sequence of Cr > Ni > Fe > Mo. The maximum erosion rate of the superalloy in the fluoride at 1000 ℃ is approximately 27 μ per hour in a three hours period.
CRASS
发表于 2025-3-22 19:21:40
http://reply.papertrans.cn/63/6258/625773/625773_7.png
lanugo
发表于 2025-3-22 23:26:43
http://reply.papertrans.cn/63/6258/625773/625773_8.png
后来
发表于 2025-3-23 03:35:21
Experimental Research on the Pellets of Brazilian Iron Concentrategth of the green balls is 3.0 times 0.5 m., the compressive strength is 16–23 N/P, the decrepitation temperature of the green balls is above 350 ℃. After blending with the magnetic concentrate, the decrepitation temperature of the green balls rises, but the strength decreases, and the amount of bentonite needs to be increased.
大气层
发表于 2025-3-23 06:19:48
Production and High-Ratio Application of Iron Ore Pellets in Shougangllets were used in three large blast furnaces with 5500 m. in Shougang Jingtang. The proportion of pellets in burden increased from 28 to 55%, slag rate of blast furnace decreased from 280 to 215 kg/tHM, and the fuel rate decreased from 500 to 480 kg/tHM.