incredulity
发表于 2025-3-23 10:38:15
The Design of a Cementitious Material Modified with the Synergistic Addition of Sodium Silicate and e in order to obtain low capillary suction. For this purpose, three different classes of cement mortar (M15, M10, M5), one type of granite fine aggregate and two different proportions of additive in the form of sodium silicate (0.002 kg, 0.005 kg) were analysed. Firstly, the capillary suction of the
pus840
发表于 2025-3-23 17:52:36
http://reply.papertrans.cn/63/6258/625770/625770_12.png
FLORA
发表于 2025-3-23 21:30:29
Mechanical and Physical Characterization of Parts Manufactured by 3D Printingw cost and easy usability, resulting in good quality products. However, the mechanical properties of manufactured pieces depend on the base material properties, manufacturing parameters and room conditions (temperature and moisture). For those reasons, to obtain the optimal conditions, three differe
Nausea
发表于 2025-3-24 01:59:55
Potential Use of Sugarcane Bagasse Ash in Cementitious Mortars for 3D Printingion related to its manufacture. As its use must become more moderate to comply with the growing environmental regulations and concerns, alternatives to PC or additives to reduce its percentage are being sought. Due to providing adequate pozzolanic activity and filler effect, many supplementary cemen
Ledger
发表于 2025-3-24 06:13:53
http://reply.papertrans.cn/63/6258/625770/625770_15.png
沟通
发表于 2025-3-24 10:26:59
http://reply.papertrans.cn/63/6258/625770/625770_16.png
沉着
发表于 2025-3-24 12:34:01
http://reply.papertrans.cn/63/6258/625770/625770_17.png
Cardiac-Output
发表于 2025-3-24 18:10:33
Finite Element Analysis to Determine Pull-Out Strength of Fixation Around Large Defect Site in Femurnt showed that the micro-motion of the bone screw leads to loosening and causes the implant to dislocate from its location. Several experimental procedures such as push-in, pull-out, screwing torque and bending tests are used to evaluate the strength of the screw fixation. Although pull-out tests ar
Limousine
发表于 2025-3-24 19:35:34
poor’, unable to meet their basic needs; and that close to half of these were in a state of absolute poverty or indigence. In this context, which included conditions of economic crisis in the rich industrialized countries of the OECD, and mounting pressures and movements for radical social reform an
GOAT
发表于 2025-3-25 01:22:36
http://reply.papertrans.cn/63/6258/625770/625770_20.png