kindred
发表于 2025-3-23 12:34:20
Rupture and Stress Corrosion Cracking of Martensitic Stainless SteelMartensitic stainless steels are used when high corrosion resistance and high mechanical properties are both required. However, martensitic stainless steels, when aged or when not properly thermally treated can fail under stress corrosion cracking as shown in the following few examples.
malapropism
发表于 2025-3-23 17:06:04
Atmospheric Corrosion of Stainless SteelSurprisingly; highly corrosion resistant alloys such as 303, 304 or 309L have experienced cracking in the open atmosphere of the containment building. So far, the root cause of this cracking is not fully understood.
Panacea
发表于 2025-3-23 21:35:23
http://reply.papertrans.cn/63/6258/625753/625753_13.png
刺穿
发表于 2025-3-24 00:52:09
http://reply.papertrans.cn/63/6258/625753/625753_14.png
地牢
发表于 2025-3-24 05:09:37
http://reply.papertrans.cn/63/6258/625753/625753_15.png
Metastasis
发表于 2025-3-24 10:02:01
Thermal Fatigue FailureThe few destructive examinations summarized hereafter show that thermal fatigue has been responsible for severe field cracking. As shown by these results, thermal fatigue failures have not been properly anticipated and have therefore led to significant design modifications of plants.
cringe
发表于 2025-3-24 13:45:23
http://reply.papertrans.cn/63/6258/625753/625753_17.png
exceptional
发表于 2025-3-24 18:14:03
http://reply.papertrans.cn/63/6258/625753/625753_18.png
无王时期,
发表于 2025-3-24 22:58:46
Mechanical Fatigue Failuremes a DE cannot or did not definitively identify the type of fatigue responsible for the failure that was observed in the field. In such a situation, the relevant DE is reported in the mechanical fatigue failure chapter, even if we think that we may be facing thermal fatigue.
Consequence
发表于 2025-3-25 02:49:54
http://reply.papertrans.cn/63/6258/625753/625753_20.png