做事过头
发表于 2025-3-26 21:38:14
Ana Navarro-Siguero,Concepción Pérez Hernández,María Teresa Saldaña-oriented simulation of non-hybridized and hybridized wooden structures. A suitable simulation method and material model must be found and validated. At the Institute of Vehicle Concepts of the German Aerospace Center, the methodology to simulate beech veneer-based structural components for static a
Dedication
发表于 2025-3-27 04:26:32
Kees Vospendent from finite element (FE) code that is used to perform FE analyses. FE analyses were carried out for several standard metal specimen geometries, for a range of different relative crack sizes. Analysis of influence of FE size and type was also performed. Comments on the applicability of VCCT i
hankering
发表于 2025-3-27 07:48:01
http://reply.papertrans.cn/63/6232/623177/623177_33.png
concubine
发表于 2025-3-27 11:15:20
http://reply.papertrans.cn/63/6232/623177/623177_34.png
exophthalmos
发表于 2025-3-27 16:26:43
Brad Williamsoncture of the ZrB.–ZrO.–MoSi.–Al coatings contributed to its good oxidation-resistant at high temperatures. As-sprayed coating consisted of the t–ZrO., h–ZrB., m–ZrO., t–MoSi. and fcc–Al. A significant content of aluminum in the initial powder mixtures during high-temperature oxidation leads to forma
鸣叫
发表于 2025-3-27 20:08:52
Paolo Marchettinihat can be achieved using SPS of the Mg-Zn-Ca-Er alloy are promising. Mechanical test results displayed reasonable improvements in compressive strength with decreasing porosity of the samples. Fracture morphology of the Mg-Zn-Ca-Er is the characteristic for brittle crystalline materials.
某人
发表于 2025-3-28 02:00:59
http://reply.papertrans.cn/63/6232/623177/623177_37.png
entreat
发表于 2025-3-28 05:55:01
Managing Sciatica and Radicular Pain in Primary Care Practice978-1-907673-56-6
lavish
发表于 2025-3-28 07:40:57
http://reply.papertrans.cn/63/6232/623177/623177_39.png
Oscillate
发表于 2025-3-28 12:39:24
10楼