connoisseur
发表于 2025-3-23 10:32:13
http://reply.papertrans.cn/63/6220/621982/621982_11.png
Allergic
发表于 2025-3-23 17:23:52
http://reply.papertrans.cn/63/6220/621982/621982_12.png
enumaerate
发表于 2025-3-23 21:51:44
http://reply.papertrans.cn/63/6220/621982/621982_13.png
Judicious
发表于 2025-3-24 02:12:37
http://reply.papertrans.cn/63/6220/621982/621982_14.png
CREST
发表于 2025-3-24 04:03:35
http://reply.papertrans.cn/63/6220/621982/621982_15.png
伙伴
发表于 2025-3-24 09:58:55
Tohru Tsujimura,Michiko Yuki,Yoshiyasu Shinohara,Ayuko Sato The results revealed mean coefficient of friction of 0.857 and 0.478 for 1 N and 10 N loads, respectively. Friction stir processing proves to be an adequate technique of improving the surface properties of magnesium alloy when using PKs ash powder as reinforcement.
禁止,切断
发表于 2025-3-24 12:40:34
http://reply.papertrans.cn/63/6220/621982/621982_17.png
性冷淡
发表于 2025-3-24 16:51:35
Kazue Yoneda,Fumihiro Tanakacal properties of up to 177 MPa UTS, 123 MPa yield strength and 2.8% elongation at fracture. Thus, the mechanical properties are equivalent to those of as-cast material. Based on these results, FFF appears to be a very promising approach to Mg implant production.
颠簸地移动
发表于 2025-3-24 22:25:46
sistent with the predicted or reported phase. These results indicate the present CALPHAD databases well represent the LPSO 14H formation in the Mg–Gd–Y–Zn system studied and can be used to tailor the microstructure to potentially improve the strength and ductility in these alloys. Further investigat
使熄灭
发表于 2025-3-25 00:52:57
Mitsuru Emi,Giovanni Gaudino,Yoshie Yoshikawa,Masaki Ohmurayaovide pathways for overcoming poor formability. An example of friction stir additive manufacturing will be used to discuss possibilities of implementing such microstructures at component level with emerging solid-state additive manufacturing techniques.