ostrish
发表于 2025-3-30 08:48:27
Corrosion Rates by Immersion and Calorimetry on the Example of Extruded Mg10Gd(1Nd)1Lated Mg10Gd. The previous study made clear that the age-hardened condition has the lowest corrosion rate but high pitting corrosion susceptibility. The extruded Mg10Gd(1Nd)1La shows the lowest pitting factors based on severe corrosion. In this study, the corrosion morphology and corrosion rates are d
内行
发表于 2025-3-30 15:55:54
Understanding the Influence of Ca and Zn on the Microstructure and Texture Evolution of Mg-(Ca, Zn)deformation mode during mechanical loading. Alloying with Ca and Zn has shown to weaken texture and encourage slipping as a deformation mode. In this study, the microstructural and texture evolution of Mg-(Zn, Ca) alloys during static recrystallization were quantified using in-situ heating, EBSD, a
木质
发表于 2025-3-30 17:18:17
Microstructural Evolution Near Microcrack in AZ31 Mg Alloy Under Electropulseshods have led to growing interest, particularly its defect-repair potential at sub-melting temperatures. Our study introduces an alternative EPT process using direct current (DC) for reduced energy consumption and enhanced scalability. The research involves applying square wave pulses with varying c
Mast-Cell
发表于 2025-3-31 00:22:01
http://reply.papertrans.cn/63/6212/621196/621196_54.png
MIR
发表于 2025-3-31 03:34:10
Alloy Development, Microstructural, and Mechanical Behaviour of Mg–Ce Based Alloystial of rare earth elements, specifically cerium (Ce), as an alloying addition to enhance the mechanical properties of Mg alloys at both room and high temperatures. However, its precise role is not yet well understood, particularly regarding nano-scale phase transformations, interface-solute segrega
否认
发表于 2025-3-31 05:49:05
The Multi-Solute Solid Solution Behaviour of Magnesium Alloys and Their Application on Materials Desnoteworthy that the solid solution of alloying elements in the α-Mg phase can have multi-effects on the properties of Mg alloys, e.g. solid solution strengthening, solid solution corrosion-resistance-enhancing, etc. And it is also notably the functional properties, e.g. damping capacities, magnetic
Binge-Drinking
发表于 2025-3-31 11:13:49
Microstructural Evolution of Hot-Rolled AZ31 Mg Plate Induced by Electropulsing Treatment(EPT) is a new method of heat treatment that utilizes Joule heating directly through electric current to a metal specimen. The process has various advantages, such as rapid heating and energy efficiency, in comparison to the conventional heating method. The authors’ recent study suggested the anisot
最小
发表于 2025-3-31 13:58:58
An Integrated Computational and Experimental Study of Static Recrystallization in the Mg–Zn–Ca Alloyloys in the Mg–Zn–Ca system. The kinetics and mechanisms of recrystallization are characterized using electron backscatter diffraction on annealed Gleeble plane-strain compression samples. This data is used to inform the computational models. In order to simulate alloying effects on static recrystal
deciduous
发表于 2025-3-31 18:52:26
An Experimental Study on Twinning Behavior in Mg Alloys with Different Solute Elements In this study, the influence of solute elements on twinning activity during monotonic and cyclic loading has been investigated in Mg alloys containing the rare earth elements Nd and Y as well as non-rare earth elements Al, Zn, and Ca. In-situ EBSD was used at multiple load steps to quantify the lev